If you take off the removeable front panel and remove the two phillips screws holding

the front panel together, you will find two junper wires (one red, the other blue).

Cut both jumpers and reset (funct + power). Remember to write down all your memories.

You will find that the radio will recieve on 108.00 to 142.990 AM on the vhf side and 850.000

to 909.9875 on the uhf side. To activate the (EXTRA OPTIONS), just press the VHF and also

the UHF BAND buttons twice. With each press, you will activate either the normal or the

EXPANDED band capabilities of the radio. It's nice when a Ham creates a rig to do things

for other Hams. Look Ma, no special wiring or soldering to do. just cut some jumpers and away you go.

Just remember, no transmitter operations on frequencies you are not allowed! ========================================================================

Note: I haven't tried or verified this, proceed at your own risk. And Do Not transmit outside of legal bands!