* for the cdrom, you have to edit this to reflect the correct drive letter
*
* Configuration file for MAKEFIDX, version 1.1
* NameFile is the name of the list of files
*/NameFile=\RBBSCD\FIDX.DEF
/NameFile=FIDX.DEF
* LocationFile is the name of the list of locations for files
*/LocationFile=\RBBSCD\LIDX.DEF
/LocationFile=LIDX.DEF
* For WriteMode, use "Replace" when replacing existing NameFile and
*     LocationFile.  If want to add to existing files, use "Update"
/WriteMode=Replace
*/WriteMode=Update
* list as many as you have (DOS) directories where you want
* all the files in them listed.

* /FileSpec= m:\msdos\starter\*.*
/FileSpec=q:\callbk\gifs\*.* 
/FileSpec=q:\docs\*.* 
/FileSpec=q:\files\ampr_org\*.* 
/FileSpec=q:\files\ant\*.* 
/FileSpec=q:\files\ant_nec\*.* 
/FileSpec=q:\files\arrl\*.* 
/FileSpec=q:\files\beacons\*.* 
/FileSpec=q:\files\clipart\*.* 
/FileSpec=q:\files\contest\*.* 
/FileSpec=q:\files\dsp\*.* 
/FileSpec=q:\files\exams\*.* 
/FileSpec=q:\files\f6fbb\*.* 
/FileSpec=q:\files\freqlsts\*.* 
/FileSpec=q:\files\hf_utils\*.* 
/FileSpec=q:\files\infodata\*.* 
/FileSpec=q:\files\logs\*.* 
/FileSpec=q:\files\mac\*.* 
/FileSpec=q:\files\misc\*.* 
/FileSpec=q:\files\morse\*.* 
/FileSpec=q:\files\p_aa4re\*.* 
/FileSpec=q:\files\p_baycom\*.* 
/FileSpec=q:\files\p_clx\*.* 
/FileSpec=q:\files\p_clxdb\*.* 
/FileSpec=q:\files\p_dbase\*.* 
/FileSpec=q:\files\p_eproms\*.* 
/FileSpec=q:\files\p_g8bpq\*.* 
/FileSpec=q:\files\p_misc\*.* 
/FileSpec=q:\files\p_msys\*.* 
/FileSpec=q:\files\p_os2\*.* 
/FileSpec=q:\files\p_tapr\*.* 
/FileSpec=q:\files\p_term\*.* 
/FileSpec=q:\files\p_thenet\*.* 
/FileSpec=q:\files\packet\*.* 
/FileSpec=q:\files\pbbs\*.* 
/FileSpec=q:\files\q_review\*.* 
/FileSpec=q:\files\qrp\*.* 
/FileSpec=q:\files\races\*.* 
/FileSpec=q:\files\rigctrl\*.* 
/FileSpec=q:\files\s_archiv\*.* 
/FileSpec=q:\files\s_orbits\*.* 
/FileSpec=q:\files\s_uo22\*.* 
/FileSpec=q:\files\sat\*.* 
/FileSpec=q:\files\swl\*.* 
/FileSpec=q:\files\t_baycom\*.* 
/FileSpec=q:\files\t_bsd\*.* 
/FileSpec=q:\files\t_docs\*.* 
/FileSpec=q:\files\t_gracil\*.* 
/FileSpec=q:\files\t_gtepms\*.* 
/FileSpec=q:\files\t_jnos\*.* 
/FileSpec=q:\files\t_k5jb\*.* 
/FileSpec=q:\files\t_ka9q\*.* 
/FileSpec=q:\files\t_misc\*.* 
/FileSpec=q:\files\t_mswin\*.* 
/FileSpec=q:\files\t_nansi\*.* 
/FileSpec=q:\files\t_os2\*.* 
/FileSpec=q:\files\t_pa0gri\*.* 
/FileSpec=q:\files\t_sys5\*.* 
/FileSpec=q:\files\t_tnos\*.* 
/FileSpec=q:\files\t_unix\*.* 
/FileSpec=q:\files\t_wampes\*.* 
/FileSpec=q:\files\t_wnos\*.* 
/FileSpec=q:\files\vhf\*.* 
/FileSpec=q:\files\w_amtor\*.* 
/FileSpec=q:\files\w_pkt\*.* 
/FileSpec=q:\files\w_ry170\*.* 
/FileSpec=q:\files\w_ry425\*.* 
/FileSpec=q:\files\w_ry850\*.* 
/FileSpec=q:\files\wefax\*.* 
/FileSpec=q:\files\worldmap\*.* 
/FileSpec=q:\files\xasm\*.* 
/FileSpec=q:\files\ziputils\*.* 
/FileSpec=q:\german\contest\*.* 
/FileSpec=q:\german\digiinfo\*.* 
/FileSpec=q:\german\doc\*.* 
/FileSpec=q:\german\fax_rtty\*.* 
/FileSpec=q:\german\logbuch\*.* 
/FileSpec=q:\german\morsen\*.* 
/FileSpec=q:\german\os2\*.* 
/FileSpec=q:\german\pk232\*.* 
/FileSpec=q:\german\pkt\*.* 
/FileSpec=q:\german\remote\*.* 
/FileSpec=q:\german\rigmods\*.* 
/FileSpec=q:\german\sat\*.* 
/FileSpec=q:\german\tcpip\*.* 
/FileSpec=q:\german\tech\*.* 
/FileSpec=q:\mods\*.* 
/FileSpec=q:\src\*.* 
/FileSpec=q:\windocs\*.* 

* A filespec will do a "DIR <filespec>" to get a listing of the
* files.   DOS normally puts the directory name near the top in
* the format "Directory of ".   If this is not true, you must
* specify an alternate way for the Directory to be identified.
* NOTE: use the following if you are using 4DOS rather than DOS
* (remove the "*" at the front).
*
*/DirString=    Directory:
*
* Note:  Normally you will NOT want to include any FileDir specs.
* This is for loading lists of directories NOT on-line on your
* system.
*
* List as many as you have of text files with file names in
* them.  The file name must be at the beginning of each line.
* It may include a drive/path.  If no drive path, a line with
* "Directory of " following by drive/path should be included at
* the top of the file.   Note: all listed files will be added
* even if they are duplicates.   If you use CMPBBS to manage your
* new files to avoid duplicates and trim down BBS lists to just
* the new files, you should have only one entry here.
*
*/FileDir=C:\DN\NEWLIST.DIR
*
*