/*
	UIDIGI Configuration source file
        Version 1.8 20020608
	Written by Marco Savegnago IW3FQG
*/
//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Set the digipeater ax.25 address callsign (SSID allowed)
// Up to 6 characters+SSID
// Digicall [t]

DigipeaterCallsign     =       UIDIGI-2

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Set the digipeater address alias
// Up to 6 characters (NO SSID)
// DIGIAlias [t]

DigipeaterAlias        =       UIDIGI

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Digipeater Info Text up to 80 char
// Info [t]
//                             12345678901234567890123456789012345678901234567890123456789012345678901234567890

InfoText               =       UIDIGI 1.8 

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Path used when SSID routing is used (Up to 8 hops)
// (Direction) Path
// xpath [path]

NorthPath              =

SouthPath              =

EastPath               =

WestPath               =

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// BudList Calls (up to 8 calls, default none)
// All SSID's of base call will be ignored
// BUdlist [calls]

BudList                =

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Generic Calls (up to 8)
// Calls recognized by digi to repeat
// Default (RELAY, WIDE, TRACE)
// Uidigi [calls]

UIDigiCall             =       RELAY, WIDE, TRACE

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Flood Call (up to 6 characters)
// Default (WIDE)
// UIFlood [call]

UIFloodCall            =       WIDE

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UI Trace Call (up to 6 characters)
// Default (TRACE)
// UITrace [call]

UITraceCall            =       TRACE

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Txdelay (default 30 = 300)
// range 1-255 x10ms
// TXdelay [n]

TxDelay                =       30

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Fullduplex (default 0)
// Enables (1) or Disables (0)
// NO COMMAND FROM CONSOLE

FullDuplex             =       0

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// PPErsistence (default 64)
// range 1-255
// Parameter fo channel access timing
// PErsistance [n]

PPersistance           =       64

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Slottime (default 10)
// range 1-255 x100ms
// SLottime [n]

SlotTime               =       10

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Frack   (default 5)
// range 1-15
// Frack [n]

Frack                  =       5

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Maxframe (default 4)
// range 1-7
// MAxframe [n]

Maxframe               =       4

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Retry (default 10)
// range 0-127
// RETry [n]

Retry                  =       10

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// RespTime 2 (default 100)
// range 0-6000 ms
// RESPtime [n]

RespTime               =       100

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Link Check (default 18000)
// range 0-65535 ms
// CHeck [n]

LinkCheck              =       18000

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Duplicate Packet Suppression Interval second (default 28)
// range 0-180 seconds
// UICheck [n]

DuplicateSuppression   =       25

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Loop Packet Suppression Interval Mask (default 3)
//  0x01 = Do not repeat frame with source address equal to digipeater call or alias
//  0x02 = Do not repeat frame with the digipeater call in the already digipeated via list
// range 0-3
// UILoop [n]

LoopSuppression        =       3

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Treat different SSID in destination call (default 1)
// Enables (1) or Disables (0) UISSID digipeating mode
// Used for SSID Directional routing
// UISsid [n]

HandleUISSID            =       0

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Reply to Query (default 1)
// Enables (1) or Disables (0) ?APRS? response query
// UIQuery [n]

ReplyToQuery           =       1

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UIFLOOD Algorithm flag  (default 0)
//  bit 0 make call substitution after the last WIDEn-n digied
//  bit 1 insert callsign before WIDEn-n
// UIFLDfl [n]

UIFLOODOptions         =       1

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// UITRACE Algorithm flag (default 0)
//  bit 0 makes call substitution after the last TRACEn-n digied
//  bit 1 Disables
// UITRFl [n]

UITRACEOptions          =       0

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Make call substitution when repeat frames addressed to UIDIGI Callsign
//  default (1)
// Enables (1) or Disables (0) UIDIGI callsign substituion for UIDIGI calls
// UIDCsb [n]

UIDIGICallSubstitution  =       1

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempt calls (default none)
// see docs

PreemptCalls		=

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempt add (default none)
// see docs

PreemptAdd		=

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Preempte Digipeater (default 0)
// see docs

PreeemptedDigipeat	=	0

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Don't change SSID (decrement) to UI Message (frame with info that start 
// with char '~' default (1) 
// 0 disables
// range 0-1
// UIMessage [n]

UIMessage  =       1

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Process only UI Frame (default 1)
// Enable processing of UI frame only 
// 0 disables
// range 0-1
// UIOnly [n]

UIOnly  =       1

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// PID of processed frames (default 240)
// Enable frame filtering algorithm base on PID of frame
// 0 disables
// range 0-255
// UIPid [n]

UIPID  =       240

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Sysop Password up to 80 char
// NO COMMAND FROM LOCAL CONSOLE

SysopPassword          =       defaultpassword

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Beacon x interval Seconds
// default 1 = 600
// default 2 = 1800
// default 3 = 3600
// range 0-65535 seconds
// BEacon [x] [n]

Beacon1Interval        =       900

Beacon2Interval        =       1800

Beacon3Interval        =       3600

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Beacon x offset (default 0)
// range 0-65535 seconds
// BEACONOffset [x] [n]

Beacon1Offset          =       0

Beacon2Offset          =       0

Beacon3Offset          =       0


//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Digipeater Beacon x Text up to 70 char
// see APRS reference doc for layout
// BText [n] [t]
//                             1234567890123456789012345678901234567890123456789012345678901234567890

Beacon1Text            =       !0000.00N/00000.00W# (APRS DIGI UIDIGI 1.8bA) 1

Beacon2Text            =       !0000.00N/00000.00W# () 2

Beacon3Text            =       !0000.00N/00000.00W# () 3

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Destination ax.25 address of beacon (6 characters + SSID)
// See APRS working group documentation APZ=experimental
// UNproto [t]

BeaconDestination      =       APZ18

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// AX.25 Beacon x path (up to 8 hops)
// Path that Beacon x will be sent out with
// Bdl [x] [path]

Beacon1Path            =       

Beacon2Path            =       WIDE

Beacon3Path            =       WIDE3-3

AuxPath                =       

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Destination ax.25 address of aux input device string
// Up to 6 characters + SSID

AuxDestination         =       AUX

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
// Aux Beacon interval (default 0)
// Sets the interval for the beacon of aux input data 
// AUXRate [n]

AuxRate                =       0

//-----------------------------------------------------------------------
//-----------------------------------------------------------------------
