FT-8000R Expanded TX Mod



 Behind the front panel (LCD Display) of the radio were the

 Lithium battery is soldered. You will see a PC board similar

 to the one below. There is a row of 15 jumpers. There is a

 larger component on the 4th and 6th position from the left.

 If you remove the component at the 6th from the left position

 and reset the radio you will have expanded TX. This does not

 open the cellular block on the radio. It may be controlled by

 one of the other jumper locations on this row of 15.



 _______________________________________________________

 |                    :::::::::::::::                  |

 |                         ^                           |

 |                         |             Lithium       |

 |                         Remove        Battery       |

 |                         R3028                  ___  |

 |                                               [   ] |

 ________________________________________________[___]_|

                                            Mike Connector



 For educational use only! Do not transmit outside the

 Amateur Bands! I am not responsible if you damage your radio.








     *================================================================*
     *    << BBS "ARACHAN" CX3VB >> - << CX3VB-6 APRS Digipeater >>   *
     *----------------------------------------------------------------*
     *   HF 7.040 Khz  VHF 145.010 Khz  AX25 CX3VB@CX3VB.CELA.URY.SA  *
     *   E-Mail cx3vb@qsl.net  -  cx3vb@amsat.org (Solo Texto plano)  *
     *----------------------------------------------------------------*
     *  Jose Maria Techera - Melo, Cerro Largo, URUGUAY, SA (GF27WO)  *
     *================================================================*
