Part Number Voltage Frequency Retail Price
CR-64 13.8VDC 30.720MHz $129.95
CR-263
(*) 8VDC 30.720MHz $109.95
CR-282 30.000MHz $139.95
CR-293 30.200MHz $309.95
CR-338 32.000MHz $74.95
CR-502 $87.95
(*)
Note: The CR-263 was used in the IC-1275A series transceiver and used an 8VDC
heater. The CR-263 is extremely hard to find. The CR-64 unit may be used
if the heater voltage is changed to 13.8VDC, bypassing the 7808 regulator. This
slight modification is easily reversible. Both the CR-64 and CR-263 are the
same physical size and pin out except for the heater voltage difference.
Since
the CR-64 was used in all the Icom IC-575A/H, IC-275A/H, IC-375A, and IC475A/H
series radios, this lends to the inclination that the 8V heater on the IC-1275A
was an engineering mistake that was never corrected. Trying to use the CR-64
directly in the IC-1275A circuit will over stress the 7808 8VDC regulator and
should be avoided. However, regulating the heater voltage can be a good
practice and should not be taken trivially.
If you
have Icom OCXO or TCXO information not listed here, please email it to K4HV.
Thanks!