Go to the source code of this file.
Functions | |
| int | DipSwitch_SetActive (int state) |
| Sets whether the DIP Switch is active. | |
| int | DipSwitch_GetActive () |
| Returns the active state of the DIP Switch. | |
| int | DipSwitch_GetValue () |
| Read the current configuration of the on-board DIP switch. | |
| bool | DipSwitch_GetValueChannel (int channel) |
| Read a single channel's value. | |
Functions for reading from the 8-position DIP switch on the Make Application Board.
Definition in file dipswitch.c.