/********************************************************************************* Copyright 2006-2008 MakingThings Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. *********************************************************************************/ /** \file rtos.c RTOS - Real Time Operating System. Functions to work within FreeRTOS on the Make Controller Board. */ /* Scheduler includes. */ #include "FreeRTOS.h" #include "task.h" #include "rtos.h" #include "string.h" #include "queue.h" #include "semphr.h" void* findTask( char *taskName, int taskID ); void* iterateForNextTask( void** lowTask, int* lowID, void** highTask, int* highID, int currentID, xList* pxList ); void* iterateByID( int id, xList* pxList ); void* iterateByName( char* taskName, xList* pxList ); void* TaskGetNext_internal( void* task ); /** \defgroup RTOS RTOS The RTOS subsystem provides a real-time operating system (RTOS) for the MAKE Controller. Currently, the Make Controller uses FreeRTOS, an open source Real-Time Operating System. It implements a scheduler that gives time to "concurrent" tasks according to their given priority. It allows programmers to focus on programming each process on the board separately, letting the RTOS determine when each of those tasks should be given processor time. More info at http://www.freertos.org * \ingroup Core */ /** \defgroup Tasks Tasks The individual "programs" that make up your application. Tasks can all be written separately and the RTOS will take of switching between them, making sure they all get the processing time they need. Each task is implemented as a continuous loop, and all tasks have the same signature: \code void MyTask( void* parameters) \endcode The void* parameters is a value that can be passed in at the time the task is created. Make sure that you put your task to sleep when it's not doing anything so that other tasks can get time as well. Otherwise, the Controller will lock up and none of the other tasks will run. \par Example \code void MyTask( void* p ) { // some initialization here int newVal = 0; // then just sit in our loop // we're going to turn an LED on whenever an AnalogIn is over a certain value while( 1 ) { newVal = AnalogIn_GetValue( 1 ); if( newVal < 512 ) AppLed_SetState( 0, 1 ); else AppLed_SetState( 0, 0 ); Sleep( 100 ); // wait for 100 milliseconds, allowing other tasks to do their thing } } \endcode Notice we don't need to include anything about Ethernet or USB communication, or anything else that might be going on. These are taken care of elsewhere by the RTOS, allowing us to focus on our LED blinking. More info at http://www.freertos.org * \ingroup RTOS * @{ */ /** Put a task to sleep for a given number of milliseconds. This lets the processor give time to other tasks. You'll always want to include some amount of Sleep( ) in your tasks to avoid locking up the Controller. @param timems An integer specifying how long to sleep in milliseconds. \par Example \code void MyTask( void *p) // in your task { while( 1 ) { Led_SetState( 0 ); // turn the LED off Sleep( 900 ); // leave it off for 900 milliseconds Led_SetState( 1 ); // turn the LED on Sleep( 10 ); // leave it on for 10 milliseconds } } \endcode */ void Sleep( int timems ) { vTaskDelay( timems / portTICK_RATE_MS ); } /** Give up the remaining time allotted to this task by the processor. The presently running task immeidately gives up the remaining time it has in the current timeslice so that other tasks can run. While Sleep() will wait the specified number of milliseconds before continuing, TaskYield() will cause the task to take processor time again as soon as it's available. */ void TaskYield( ) { taskYIELD(); } /** Create a new task. When creating a new task, be sure that you allocate it enough stack space. A task must have enough stack space to load any of the potential data structures it will be working with, otherwise it will die and the Controller will crash. Since FreeRTOS is pre-emptive, higher priority tasks will get processor time before lower priority tasks. The priority level is a bit arbitrary, but choose something that makes sense in relation to the other tasks you have running. Always be sure to block a task when possible, in order to give processor time to other tasks. @param taskCode A pointer to the function that will run when the task starts. @param name A character string containing the name of the task. @param stackDepth An integer specifying in bytes the size of the task's stack. @param parameters A void* parameter which will be passed into the task at create time. @param priority An integer specifying the task's priority (0 lowest - 7 highest priority). @return A pointer to the handle for the newly created task, or NULL if it didn't succeed. @see TaskDelete( ) \par Example \code // create the task MyTask, called "Me", with a stack of 1000 bytes, no parameters, at priority 1 void *taskPtr = TaskCreate( MyTask, "Me", 1000, 0, 1 ); void MyTask( void *p) // in your task { // set up any variables that you'll need int counter = 0; // then start your continuous loop while( 1 ) { counter++; Sleep( 100 ); } } \endcode */ void* TaskCreate( void (taskCode)( void*), char* name, int stackDepth, void* parameters, int priority ) { void* taskHandle; if( xTaskCreate( taskCode, (signed char*)name, ( stackDepth >> 2 ), parameters, priority, &taskHandle ) == 1 ) return taskHandle; else return NULL; } /** Delete an existing task. TaskCreate( ) returns a pointer to the newly created task. You'll need to hang onto this pointer in order to delete the task. @param task A pointer to the handle of the task to be deleted. \par Example \code void *taskPtr = TaskCreate( MyTask, "Me", 1000, 0, 1 ); // create a new task // ... run the task ... TaskDelete( taskPtr ); // then delete it \endcode */ void TaskDelete( void* task ) { vTaskDelete( task ); } /** Specify that a task is entering a period during which it should not be interrupted. Call this from within your task. Be sure to minimize use of this, and to call TaskExitCritical() as soon as the task has completed its critical stage. Other tasks can't get any processor time while in this state, and performance might be compromised. @see TaskExitCritical( ) */ void TaskEnterCritical( ) { taskENTER_CRITICAL(); } /** Specify that a task is exiting a critical period, in response to TaskEnterCritical(). Once the task exits a critical period, FreeRTOS will resume switching this task as usual. @see TaskEnterCritical( ) */ void TaskExitCritical( ) { taskEXIT_CRITICAL(); } /** Check how much stack is available for a given task. When a task is created, it is initialized with a stack depth. This function will return the numbers of bytes available from that initial allocation. @return An integer specifying the available stack in bytes. @see TaskGetStackAllocated( ) \par Example \code void *taskPtr = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); // create a new task int freeBytes = TaskGetRemainingStack( taskPtr ); // check how much of the task's stack has been used \endcode */ int TaskGetRemainingStack( void* task ) { if( task != NULL ) return usVoidTaskCheckFreeStackSpace( task ); else return CONTROLLER_ERROR_INSUFFICIENT_RESOURCES; } /** Get a pointer to a task by its name. When a task is created, it is initialized with a name. If you don't have a pointer to the task itself but you know its name, you can still get a reference to the task. This is a costly function, as it shuts down the scheduler to search for the task, so it should really only be used in a debug setting. @param taskName A character string specifying the name of the task to find. @return A pointer to the task, or NULL if the task was not found. @see getTaskByID() \par Example \code TaskCreate( MyTask, "Mine", 1000, 0, 1 ); // a task has been created, but we don't have a pointer to it void *taskPtr = getTaskByName( "Mine" ); // but we can still get a pointer to it by its name \endcode */ void* getTaskByName( char *taskName ) { void *tcb = NULL; vTaskSuspendAll(); { tcb = findTask( taskName, -1 ); } xTaskResumeAll(); return tcb; } /** Get a pointer to a task by its ID number. Each task is given a unique ID number by freeRTOS. If you know this number, but don't have a pointer to the task, use this function to get a pointer to the task itself. This is a costly function, as it shuts down the scheduler to search for the task, so it should really only be used in a debug setting. @param taskID An integer specifying the unique ID number given to the task by FreeRTOS @return A pointer to the task, or NULL if the task was not found. @see TaskGetIDNumber( ) */ void* getTaskByID( int taskID ) { void* tcb = NULL; vTaskSuspendAll(); { tcb = findTask( NULL, taskID ); } xTaskResumeAll(); return tcb; } /** Get the priority of a task. When a task is created, it's given a priority from 1-7. Use this function to get the task's priority after it has been created. @param task A pointer to the task. @return An integer specifying the task's priority \par Example \code void *taskPtr = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); int priority = TaskGetPriority( taskPtr ); // will return 1 \endcode */ int TaskGetPriority( void* task ) { return xTaskGetPriority( task ); } /** Get the ID number of a task. FreeRTOS assigns each task a unique ID number. Use this function to retrieve a particular task's ID number. Task ID numbers are not necessarily sequential. @param task A pointer to the task. @return An integer specifying the task's unique ID within freeRTOS, or -1 on fail. \par Example \code void *taskPtr = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); int id = TaskGetIDNumber( taskPtr ); \endcode */ int TaskGetIDNumber( void* task ) { return xTaskGetIDNumber( task ); } /** Get the name of a task. Read back the name a task was given when it was created. @param task A pointer to the task. @return The task's name as a string \par Example \code void *taskPtr = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); char* name = TaskGetName( taskPtr ); // will return "Mine" \endcode */ char* TaskGetName( void* task ) { return (char*)xTaskGetName( task ); } /** Read the amount of stack initially allocated for a task. Each task is allocated a certain amount of stack space when it's created. Use this function to determine how much stack space a task was originally given. @param task A pointer to the task. @return An integer specifying the amount of stack, in bytes, that this task was allocated. @see TaskGetRemainingStack( ) \par Example \code void *taskPtr = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); int stack = TaskGetStackAllocated( taskPtr ); // will return 1000 \endcode */ int TaskGetStackAllocated( void* task ) { return xTaskGetStackAllocated( task ); } /** Get a pointer to the task that's currently running. @return A pointer to the task that's currently running. \par Example \code void *currentTask = TaskGetCurrent( ); \endcode */ void* TaskGetCurrent( ) { return xTaskGetCurrentTaskHandle( ); } /** Read the highest priority being used by any existing task. @return An integer specifying the priority. \par Example \code int highestPriority = TaskGetTopPriorityUsed( ); \endcode */ int TaskGetTopPriorityUsed( ) { return xTaskGetTopUsedPriority( ); } /** Get a pointer to the task whose ID comes after a given ID. FreeRTOS assigns each task a unique ID number internally. This function will return a pointer to the task with the next ID. Note that this does not necessarily mean that this task will be given processor time next, just that its ID is the next one along in the list of all tasks. This is an expensive function since it needs to stop the scheduler to search the lists of tasks. It should only really be used in a debug setting. @param task A pointer to the previous task. @return A pointer to the task that's next in the ID list. \par Example \code void *oneTask = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); void *nextTask = TaskGetNext( oneTask ); \endcode */ void* TaskGetNext( void* task ) { void* taskreturn = NULL; vTaskSuspendAll(); { taskreturn = TaskGetNext_internal( task ); } xTaskResumeAll( ); return taskreturn; } /** Get the total number of tasks that exist at a given moment. @return An integer specifying the number of tasks. \par Example \code int numberOfTasks = GetNumberOfTasks( ); \endcode */ int GetNumberOfTasks( ) { return uxTaskGetNumberOfTasks( ); } /** Update the priority of a task. Higher numbers mean higher priority/more processor time. @param task A pointer to the task you want to update. @param priority An integer specifying the new priority. \par Example \code void *task = TaskCreate( MyTask, "Mine", 1000, 0, 1 ); // create a task // ... now update the task's priority to 6 TaskSetPriority( task, 6 ); \endcode */ void TaskSetPriority( void* task, int priority ) { vTaskPrioritySet( task, priority ); } /** Returns the number of ticks since the scheduler started. @return the number of ticks */ int TaskGetTickCount( void ) { return xTaskGetTickCount( ); } /** @} */ /** \defgroup Utils Utilities General utilities provided by the RTOS. FreeRTOS has several options for memory management - we've chosen a default one here which is pretty sensible in most cases, but you're of course welcome to use whatever makes most sense for your application. See http://www.freertos.org/a00111.html for the available options. * \ingroup RTOS * @{ */ /** Dynamically allocate memory from the heap. This is pretty much the same as a normal malloc(), but for the SAM7X. @return A pointer to the allocated memory, or NULL if the memory was not available. @see Free(), System_GetFreeMemory( ) \par Example \code int bufferSize = 1024; char *bufferPtr = Malloc( bufferSize ); // now you have a 1024 character buffer \endcode */ void* Malloc( int size ) { return pvPortMalloc( size ); } /** Same as Malloc, but keeps trying until it succeeds. This is a convenience function that will continue to call Malloc( ) at a given interval until it returns successfully. Once this function returns, you know you have been allocated the memory you asked for. @param size An integer specifying the amount of memory, in bytes, you want to allocate. @param interval An integer specifying the number of milliseconds to wait between successive attempts to allocate memory. It's best to not set this too low, as it will be a bit taxing on the system. @return A pointer to the allocated memory, or NULL if the memory was not available. @see Free(), System_GetFreeMemory( ) \par Example \code char *bufferPtr = MallocWait( 1024, 100 ); // now you have a 1024 character buffer \endcode */ void* MallocWait( int size, int interval ) { void* retval = NULL; while( retval == NULL ) { retval = Malloc( size ); if( retval ) return retval; else Sleep( interval ); } return NULL; // should never get here } /** Free memory from the heap. Once you've allocated memory using Malloc(), free it when you're done with it. It's usually a good idea to set the pointer the freed memory to NULL after you've freed it. @param memory A pointer to the memory created by Malloc( ) @see Malloc(), System_GetFreeMemory( ) \par Example \code char *bufferPtr = Malloc( 1024 ); // allocate 1024 bytes of memory // ...your processing here... Free( bufferPtr ); // then free the memory when you're done with it \endcode */ void Free( void* memory ) { vPortFree( memory ); } /** @} */ /** \defgroup Queues Queues Queues allow for thread-safe inter-process communication. A queue is a list of items that can be passed from one task to another. Items are placed in a queue by copy - not by reference. It is therefore preferable, when queuing large items, to only queue a pointer to the item. Tasks can block on a queue to wait for either data to become available on the queue, or space to become available to write to the queue. More info at http://www.freertos.org - some documentation here used from the FreeRTOS doc by Richard Barry. * \ingroup RTOS * @{ */ /** Create a new queue. This allocates storage for the queue. It's usually a good idea to pass around pointers on queues as opposed to whole data structures, as that's quite resource intensive. @param length The maximum number of items that the queue can contain. @param itemSize The number of bytes each item in the queue will require. Items are queued by copy, not by reference, so this is the number of bytes that will be copied for each posted item. Each item on the queue must be the same size. @return A pointer to the queue on success, 0 if the queue couldn't be created. \par Example \code struct myData_ { int count; char buffer[100]; }; // create a queue that can hold 5 pointers to myData structures struct MyData_* myData; void* myQueue = QueueCreate( 5, sizeof( myData* ) ); if( myQueue == 0 ) // then the queue can't be used. else // continue processing... \endcode */ void* QueueCreate( uint length, uint itemSize ) { return xQueueCreate( length, itemSize ); } /** Post an item onto the front of a queue. The item is queued by copy, not by reference. This function must not be called from an interrupt service routine. See xQueueSendFromISR () for an alternative which may be used in an ISR. @param queue The queue to send to. @param itemToQueue A pointer to the item to send on the queue. @param msToWait The maximum number of milliseconds the task should block waiting for space to become available on the queue, should it already be full. The call will return immediately if this is set to 0. @return 1 on success, 0 on failure. \par Example \code struct MyData_ { int count; char buffer[100]; }; // create a queue that can hold 5 pointers to myData structures struct MyData_* myData; void* myQueue = QueueCreate( 5, sizeof( myData* ) ); if( myQueue ) { if( QueueSendToFront( myQueue, (void*)&myData, 10 ) ) // wait 10 ms to send if queue is full // then we're all set else // deal with an unsuccessful send } \endcode */ int QueueSendToFront( void* queue, void* itemToQueue, int msToWait ) { return xQueueSend( queue, itemToQueue, msToWait / portTICK_RATE_MS ); } /** Post an item onto the back of a queue. The item is queued by copy, not by reference. This function must not be called from an interrupt service routine. See xQueueSendFromISR () for an alternative which may be used in an ISR. @param queue The queue to send to. @param itemToQueue A pointer to the item to send on the queue. @param msToWait The maximum number of milliseconds the task should block waiting for space to become available on the queue, should it already be full. The call will return immediately if this is set to 0. @return 1 on success, 0 on failure. \par Example \code struct MyData_ { int count; char buffer[100]; }; // create a queue that can hold 5 pointers to myData structures struct MyData_* myData; void* myQueue = QueueCreate( 5, sizeof( myData* ) ); if( myQueue ) { if( QueueSendToBack( myQueue, (void*)&myData, 10 ) ) // wait 10 ms to send if queue is full // then we're all set else // deal with an unsuccessful send } \endcode */ int QueueSendToBack( void* queue, void* itemToQueue, int msToWait ) { return xQueueSend( queue, itemToQueue, msToWait / portTICK_RATE_MS ); } /** Read an item off of a queue. The item is received by copy so a buffer of adequate size must be provided. The number of bytes copied into the buffer was defined when the queue was created. The item will be removed from the queue once it is read. This function must not be used in an interrupt service routine. See QueueReceiveFromISR( ) for an alternative that can. @param queue The queue to receive from. @param buffer A pointer to the buffer the item will be read into. @param msToWait The maximum number of milliseconds the task should block waiting for an item to show up on the queue, should it be empty. @return 1 on success, 0 on failure. \par Example \code struct MyData_ { int count; char buffer[100]; }; void* myQueue; void SomeTask( void* p ) { // create a queue that can hold 5 pointers to myData structures myQueue = QueueCreate( 5, sizeof( myData* ) ); struct MyData_ myData; // the data we'll be sending myData.count = 12; myData.buffer = "ABCDEF"; QueueSendToFront( myQueue, &myData, 0 ); } void AnotherTask( void* p ) { int dataSize = sizeof( struct MyData_ ); struct MyData_* rxData; // a pointer to some data if( myQueue ) { if( QueueReceive( myQueue, rxData, 100 ) ) // wait up to 100 milliseconds for data { // now rxData points to the data posted in SomeTask } } } \endcode */ int QueueReceive( void* queue, void* buffer, int msToWait ) { return xQueueReceive( queue, buffer, msToWait / portTICK_RATE_MS ); } /** Return the number of messages waiting in a queue. @param queue The queue to look at. @return The number of messages waiting. \par Example \code int msgs = QueueMessagesWaiting( myQueue ); \endcode */ int QueueMessagesWaiting( void* queue ) { return uxQueueMessagesWaiting( queue ); } /** Delete a queue - freeing all the memory allocated for storing of items placed on the queue. @param queue The queue to delete. \par Example \code QueueDelete( myQueue ); \endcode */ void QueueDelete( void* queue ) { vQueueDelete( queue ); } /** Post an item to the front of a queue from within an interrupt service routine. Items are queued by copy not reference so it is preferable to only queue small items, especially when called from an ISR. In most cases it would be preferable to store a pointer to the item being queued. @param queue The queue to send to. @param itemToSend A pointer to the item to send on the queue. The size of the items the queue will hold was defined when the queue was created, so this many bytes will be copied from itemToSend into the queue storage area. @param taskPreviouslyWoken This is included so an ISR can post onto the same queue multiple times from a single interrupt. The first call should always pass in 0. Subsequent calls should pass in the value returned from the previous call. @return 1 if a task was woken by posting onto the queue. This is used by the ISR to determine if a context switch may be required following the ISR. \par Example \code struct MyData_ { int count; char buffer[100]; }; int taskWokenByPost = 0; // be sure to initialize to 0 // create a queue that can hold 5 pointers to myData structures struct MyData_ myData; void* myQueue = QueueCreate( 5, sizeof( myData* ) ); if( myQueue ) { taskWokenByPost = QueueSendToFrontFromISR( myQueue, (void*)&myData, taskWokenByPost ) if( taskWokenByPost ) { // We should switch context so the ISR returns to a different task. portYIELD_FROM_ISR( ); } } \endcode */ int QueueSendToFrontFromISR( void* queue, void* itemToSend, int taskPreviouslyWoken ) { return xQueueSendToFrontFromISR( queue, itemToSend, taskPreviouslyWoken ); } /** Post an item to the back of a queue from within an interrupt service routine. Items are queued by copy not reference so it is preferable to only queue small items, especially when called from an ISR. In most cases it would be preferable to store a pointer to the item being queued. @param queue The queue to send to. @param itemToSend A pointer to the item to send on the queue. The size of the items the queue will hold was defined when the queue was created, so this many bytes will be copied from itemToSend into the queue storage area. @param taskPreviouslyWoken This is included so an ISR can post onto the same queue multiple times from a single interrupt. The first call should always pass in 0. Subsequent calls should pass in the value returned from the previous call. @return 1 if a task was woken by posting onto the queue. This is used by the ISR to determine if a context switch may be required following the ISR. \par Example \code struct MyData_ { int count; char buffer[100]; }; int taskWokenByPost = 0; // be sure to initialize to 0 // create a queue that can hold 5 pointers to myData structures struct MyData_ myData; void* myQueue = QueueCreate( 5, sizeof( myData* ) ); if( myQueue ) { taskWokenByPost = QueueSendToBackFromISR( myQueue, (void*)&myData, taskWokenByPost ) if( taskWokenByPost ) { // We should switch context so the ISR returns to a different task. portYIELD_FROM_ISR( ); } } \endcode */ int QueueSendToBackFromISR( void* queue, void* itemToSend, int taskPreviouslyWoken ) { return xQueueSendToBackFromISR( queue, itemToSend, taskPreviouslyWoken ); } /** Receive an item from a queue from within an interrupt service routine. You'll need to have enough storage for the queue to copy the item into. Receiving from a queue takes the item off the queue. @param queue The queue to receive from. @param buffer A pointer to the buffer into which the received item will be copied - ensure that there's enough room. @param taskWoken A task may be blocked waiting for an item to be read from the queue, freeing up space. If QueueReceiveFromISR causes such a task to unblock *taskWoken will get set to 1, otherwise *taskWoken will remain unchanged. @return 1 if an item was successfully received from the queue, otherwise 0. switch may be required following the ISR. \par Example \code int taskWokenByReceive = 0; // be sure to initialize to 0 void* myQueue = QueueCreate( 5, sizeof( char ) ); if( myQueue == 0 ) // queue couldn't be created... char data; while( QueueReceiveFromISR( myQueue, (void*)&data, taskWokenByReceive ) ) { // process new items from queue here // If removing an item from the queue woke the task that was // posting onto the queue, taskWokenByReceive will have been set to // 1. No matter how many times this loop iterates only one // task will be woken. } if( taskWokenByReceive ) { // We should switch context so the ISR returns to a different task. taskYIELD (); } \endcode */ int QueueReceiveFromISR( void* queue, void* buffer, long* taskWoken ) { return xQueueReceiveFromISR( queue, buffer, taskWoken ); } /** @} */ /** \defgroup SemaphoresMutexes Semaphores & Mutexes Thread-safe methods to protect access to shared resources. Quite often you'll have more than one task trying to get access to the same resources. To ensure that the resource is not in some intermediate state between reading and writing, it's necessary to serialize access to it. Semaphores and mutexes provide a way to do this. Binary semaphores and mutexes are very similar but have some subtle differences: Mutexes include a priority inheritance mechanism, binary semaphores do not. This makes binary semaphores the better choice for implementing synchronisation (between tasks or between tasks and an interrupt), and mutexes the better choice for implementing simple mutual exclusion. A binary semaphore need not be given back once obtained, so task synchronisation can be implemented by one task/interrupt continuously 'giving' the semaphore while another continuously 'takes' the semaphore. The priority of a task that 'takes' a mutex can potentially be raised if another task of higher priority attempts to obtain the same mutex. The task that owns the mutex 'inherits' the priority of the task attempting to 'take' the same mutex. This means the mutex must always be 'given' back - otherwise the higher priority task will never be able to obtain the mutex, and the lower priority task will never 'disinherit' the priority. More info at http://www.freertos.org - much documentation here used from the FreeRTOS doc by Richard Barry. * \ingroup RTOS * @{ */ /** Create a semaphore. @return A pointer to the newly created semaphore, or NULL on failure. \par Example \code void* mySemaphore = SemaphoreCreate( ); if( mySemaphore != NULL ) { // The semaphore was created successfully and can now be used. } \endcode */ void* SemaphoreCreate( ) { void *sem; vSemaphoreCreateBinary( sem ); return sem; } #if ( configUSE_MUTEXES == 1 ) void* MutexCreate( ) { return xQueueCreateMutex( ); } #endif /** Obtain a semaphore. The semaphore must have first been created with SemaphoreCreate( ). @param semaphore The semaphore to take. @param blockTime The time, in milliseconds, to wait for the semaphore to become available. @return 1 if the semaphore was obtained. 0 if blockTime expired without the semaphore becoming available. @see SemaphoreCreate( ), SemaphoreGive( ) \par Example \code void* mySemaphore; SemaphoreCreate( mySemaphore ); if( SemaphoreTake( mySemaphore, 100 ) ) // wait 100 milliseconds on this semaphore { // now access the protected resources } \endcode */ int SemaphoreTake( void* semaphore, int blockTime ) { return xSemaphoreTake( semaphore, blockTime / portTICK_RATE_MS ); } /** Release a semaphore. This must not be used from an ISR. See SemaphoreGiveFromISR( ) for an alternative which can be used from an ISR. @param semaphore The semaphore to release. @return 1 if the semaphore was released. 0 if an error occurred. Semaphores are implemented using queues. An error can occur if there is no space on the queue to post a message - indicating that the semaphore was not first obtained correctly. @see SemaphoreCreate( ), SemaphoreTake( ) \par Example \code void* mySemaphore; SemaphoreCreate( mySemaphore ); if( SemaphoreTake( mySemaphore, 1000 ) ) // wait 1000 milliseconds on this semaphore { // access the protected resources // then release the semaphore if( !SemaphoreGive( mySemaphore ) ) // then handle the error here } \endcode */ int SemaphoreGive( void* semaphore ) { return xSemaphoreGive( semaphore ); } /** Release a semaphore from within an ISR. See SemaphoreGive( ) for an alternative which can be used when not in an ISR. @param semaphore The semaphore to release. @param taskWoken This is included so an ISR can make multiple calls to SemaphoreGiveFromISR() from a single interrupt. The first call should always pass in 0. Subsequent calls should pass in the value returned from the previous call. @return 1 if the semaphore was released. 0 if an error occurred. Semaphores are implemented using queues. An error can occur if there is no space on the queue to post a message - indicating that the semaphore was not first obtained correctly. \par Example \code void* mySemaphore; SemaphoreCreate( mySemaphore ); void TimerISR( ) { static int taskWoken = 0; taskWoken = SemaphoreGiveFromISR( mySemaphore, taskWoken ); // If taskWoken was set to true you may want to yield (force a switch) // here. } \endcode */ int SemaphoreGiveFromISR( void* semaphore, int taskWoken ) { return xSemaphoreGiveFromISR( semaphore, taskWoken ); } /** @} */ void* TaskGetNext_internal( void* task ) { int currentID; int lowID = 1024; // some large number that will be greater than the number of tasks... int highID = 1024; void* lowTask = NULL; void* highTask = NULL; void* tcb = NULL; unsigned portBASE_TYPE uxQueue = TaskGetTopPriorityUsed( ) + 1; if( task == NULL ) currentID = 1; else currentID = TaskGetIDNumber( task ); // look through all the possible lists of tasks do { uxQueue--; if( !listLIST_IS_EMPTY( GetReadyTaskByPriority( uxQueue ) ) ) { tcb = iterateForNextTask( &lowTask, &lowID, &highTask, &highID, currentID, GetReadyTaskByPriority( uxQueue ) ); if( tcb != NULL ) return tcb; } }while( uxQueue > ( unsigned portSHORT ) tskIDLE_PRIORITY ); // check the list of delayed tasks if( !listLIST_IS_EMPTY( GetDelayedTaskList( ) ) ) { tcb = iterateForNextTask( &lowTask, &lowID, &highTask, &highID, currentID, GetDelayedTaskList( ) ); if( tcb != NULL ) return tcb; } // check the list of overflow delayed tasks if( !listLIST_IS_EMPTY( GetOverflowDelayedTaskList( ) ) ) { tcb = iterateForNextTask( &lowTask, &lowID, &highTask, &highID, currentID, GetOverflowDelayedTaskList( ) ); if( tcb != NULL ) return tcb; } // check the list of tasks about to die if( !listLIST_IS_EMPTY( GetListOfTasksWaitingTermination( ) ) ) { tcb = iterateForNextTask( &lowTask, &lowID, &highTask, &highID, currentID, GetListOfTasksWaitingTermination( ) ); if( tcb != NULL ) return tcb; } // check the list of suspended tasks if( !listLIST_IS_EMPTY( GetSuspendedTaskList( ) ) ) tcb = iterateForNextTask( &lowTask, &lowID, &highTask, &highID, currentID, GetSuspendedTaskList( ) ); if( highTask ) return highTask; else return lowTask; } // one function to search either by name or ID // pass in a garbage value for the parameter you're not interested in void* findTask( char *taskName, int taskID ) { bool byName; if( taskName == NULL && taskID > 0 ) byName = false; if( taskName != NULL && taskID < 0 ) byName = true; unsigned portBASE_TYPE uxQueue = TaskGetTopPriorityUsed( ) + 1; void *tcb = NULL; // look through all the possible lists of tasks do { uxQueue--; if( !listLIST_IS_EMPTY( GetReadyTaskByPriority( uxQueue ) ) ) { if( byName ) tcb = iterateByName( taskName, GetReadyTaskByPriority( uxQueue ) ); else tcb = iterateByID( taskID, GetReadyTaskByPriority( uxQueue ) ); if( tcb != NULL ) return tcb; } }while( uxQueue > ( unsigned portSHORT ) tskIDLE_PRIORITY ); // check the list of delayed tasks if( !listLIST_IS_EMPTY( GetDelayedTaskList( ) ) ) { if( byName) tcb = iterateByName( taskName, GetDelayedTaskList( ) ); else tcb = iterateByID( taskID, GetDelayedTaskList( ) ); if( tcb != NULL ) return tcb; } // check the list of overflow delayed tasks if( !listLIST_IS_EMPTY( GetOverflowDelayedTaskList( ) ) ) { if( byName ) tcb = iterateByName( taskName, GetOverflowDelayedTaskList( ) ); else tcb = iterateByID( taskID, GetOverflowDelayedTaskList( ) ); if( tcb != NULL ) return tcb; } // check the list of tasks about to die if( !listLIST_IS_EMPTY( GetListOfTasksWaitingTermination( ) ) ) { if( byName ) tcb = iterateByName( taskName, GetListOfTasksWaitingTermination( ) ); else tcb = iterateByID( taskID, GetListOfTasksWaitingTermination( ) ); if( tcb != NULL ) return tcb; } // check the list of suspended tasks if( !listLIST_IS_EMPTY( GetSuspendedTaskList( ) ) ) { if( byName ) tcb = iterateByName( taskName, GetSuspendedTaskList( ) ); else tcb = iterateByID( taskID, GetSuspendedTaskList( ) ); } return tcb; } void* iterateByID( int id, xList* pxList ) { void *pxNextTCB, *pxFirstTCB; listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList ); do { listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList ); if( TaskGetIDNumber( pxNextTCB ) == id ) return pxNextTCB; } while( pxNextTCB != pxFirstTCB ); // if we get down here, we didn't find it. return NULL; } void* iterateByName( char* taskName, xList* pxList ) { void *pxNextTCB, *pxFirstTCB; listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList ); do { listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList ); if( strcmp( TaskGetName( pxNextTCB ), taskName ) == 0 ) return pxNextTCB; } while( pxNextTCB != pxFirstTCB ); // if we get down here, we didn't find it. return NULL; } void* iterateForNextTask( void** lowTask, int* lowID, void** highTask, int* highID, int currentID, xList* pxList ) { void *pxNextTCB, *pxFirstTCB; listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList ); do { listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList ); int id = TaskGetIDNumber( pxNextTCB ); if( id == (currentID + 1) ) // if it's the ID we're looking for plus one, we got it and we're out. return pxNextTCB; if( id > currentID && id < *highID ) { *highID = id; *highTask = pxNextTCB; } if( id < currentID && id < *lowID && id != 1 ) // we don't want id 1 since that's IDLE and there's no real task there. { *lowID = id; *lowTask = pxNextTCB; } } while( pxNextTCB != pxFirstTCB ); // if we get down here, we didn't find it. return NULL; }