2.9 through 30 MHZ


1. Press MANUAL
2. Press ENTER
3. Press 10K DOWN
4. Press ENTER
5. Press MEMORY - The frequency will read 2.933.0
6. Press MANUAL
7. Press SCAN PROG
8. Press 1K UP or to scan in 10 K or 100K increments just press 10K or 100K.
9. Press ENTER Twice
10. Press 1MHZ UP Until the display reads 29.993.0
11.Press other buttons to get 29.999.0
12. Press ENTER - Your Finished

Radio will scan 2.993.0 to 29.999.9

Use the SCAN buttons UP and DOWN to scan frequencies.


NOTE: Do not scan above the frequency limit or the radio will lockup
and you will have to reprogram the radio. You can scan down and the radio
will loop back thru the high frequency and continue scanning down.