N8JRP Echolink Commands Print Friendly and PDF

This node is located in Flat Rock, Michigan on 145.540 MHZ simplex with a PL of 100 HZ.  The node itself is Echolink node #326806 and ALLSTAR Node #40718. When I last talked to N8JRP he said that the antenna was on a tower at 45 ft.

Short Cuts

22

AB5JK-R Allstar Node

24

*DODROPIN* Conference

25

N8AD-R HF Remote

23

WY8DOT-R

26

*HI-GATE*

Command

Description  

Code

Connect

Connects to a station on the Internet, based on its node number.

Num

Connect by Call

Connects to a station on the Internet, based on its callsign.

C+call+#

Random Node

Selects an available node (of any type) at random, and tries to connect to it.

00

Random Link

Selects an available link or repeater (-L or -R) at random, and tries to connect to it.

01

Random Conf

Selects a conference server at random, and tries to connect to it.

02

Random User

Selects an available single-user station at random, and tries to connect to it.

03

RandomFavNode

Selects an available node (of any type) at random from the Favorites List, and tries to connect to it.

001

RandomFavLink

Selects an available link or repeater (-L or -R) at random from the Favorites List, and tries to connect to it.

011

RandomFavConf

Selects a conference server at random from the Favorites List, and tries to connect to it.

021

RandomFavUser

Selects an available single-user station at random, and tries to connect to it.

031

Disconnect

Disconnects the station that is currently connected.  If more than one station is connected, disconnects only the most-recently-connected station.

#

Disconnect All

Disconnects all stations.

##

Reconnect

Re-connects to the station that most recently disconnected.

09

Status

Announces the callsign of each station currently connected.

08

Link Down

Disables EchoLink (no connections can be established).

(none)

Link Up

Enables EchoLink.

(none)

Play Info

Plays a brief ID message.

*

Query by Call

Looks up a station by its callsign, and reads back its node number and status.

07+call+#

Query by Node

Looks up a station by its node number, and reads back its callsign and status.

06+num

Profile Select

Switches to a different stored set of configuration settings (0 through 9).

B#+num

Listen-Only On

Inhibits transmission from RF to the Internet.

0511

Listen-Only Off

Restores normal transmission from RF to the Internet.

0510

Get more info at: http://www.n8jrp.us/

From  -- http://www.n8jrp.us/