HRO

 

  • 1) Manufacturer: ICOM
  • Item : IC-706MKIIG
  • Description : HF/6/2/440MHZ XCVR WITH DSP
  • Price : $799.95
  • Coupon/special : $20.00
  • Your Final Cost : $779.95
    •

    Additional information :

    IC-706MKIIG Specifications This information is taken directly off of the ICOM IC-706MKIIG brochure.

     

  • General
  • * Frequency Coverage:
  • * Receive:
  • * 0.030 - 199.999 MHz*, 400 - 470 MHz*
  • * Transmit:
  • * 1.8 - 1.999 MHz*
  • 3.5 - 3.999 MHz*
  • 7.0 - 7.300 MHz*
  • 10.1 - 10.150 MHz
  • 14.0 - 14.350 MHz
  • 18.068 - 18.168 MHz
  • 21.0 - 21.450 MHz
  • 24.89 - 24.990 MHz
  • 28.0 - 29.700 MHz
  • 50.0 - 54.000 MHz*
  • 144.0 - 148.000 MHz*
  • 430.0 - 450.000 MHz*
  • * Varies according to version
  • * Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
  • * Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
    •
  • * Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
  • * Power supply requirement: 13.8 V ± 15% (negative ground)
  • * Frequency stability: Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 °C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±5 ppm.
  • * Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
  • * Usable temperature range : -10°C to 60°C (14°F to140°F)
  • * Dimensions (projections not included):
  • * 167(W) X 58(H) X 200(D) mm
  • * 6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
  • * Weight: 2.45 kg (5 lb 6 oz)
  • * CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
  • * ACC connector: 13 pin
  •  
  • Transmitter
  • * Output power:
  • SSB/CW/RTTY/FM AM
  • HF/50 MHz 5 - 100 W 2 - 40 W
  • 144 MHz 2.5 - 50 W 2 - 20 W
  • 440 MHz 2 - 20 W 2 - 8 W
  •  
  • * Modulation system:
  • SSB Balanced modulation
  • AM Low level modulation
  • FM Variable reactance modulation
  •  
  • * Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
  • * Carrier suppression: More than 40 dB
  • * Unwanted sideband: More than 50 dB
  • * Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
  • * RTTY connector: 3-conductor 3.5 (d) mm (1/8")
  •  
  • Receiver
  • * Receive system:
  • * SSB/CW/AM/WFM: Double superheterodyne
  • * FM : Triple superheterodyne
  • * Intermediate frequencies
  • 1st 2nd 3rd
  • SSB/AM-N/FM 69.0115 MHz 9.0115 MHz 0.455 kHz (FM only)
  • CW 69.0106 9.0106 -
  • RTTY 69.0105 MHz 9.0105 MHz -
  • AM/FM-N 69.0100 MHz 9.0100 MHz 0.455 kHz (FM only)
  • WFM 70.7000 MHz 10.7000 MHz -
  •  
  • * Receive sensitivity (preamp on, except 4- - 4.5 and 8 - 9 MHz)
  • SSB/CW
  • 10 dB S/N AM
  • 10 dB S/N FM
  • 12 dB SINAD WFM
  • 12 dB SINAD
  • 0.5 - 1.8 MHz - 13 µV - -
  • 1.8 - 28 MHz 0.15 µV 2.0 µV - -
  • 28 - 29.7 MHz 0.15 µV 2.0 µV 0.5 µV -
  • 50 MHz band 0.12 µV 1.0 µV 0.25 µV -
  • 76 - 108 MHz - - - 10.0 µV
  • 144/440 MHz band 0.11 µV 1.0 µV 0.18 µV -
  •  
  • * Squelch Sensitivity (threshold)
  • SSB Less than 5.6 µV
  • FM Less than 0.3 µV
  •  
  • * Selectivity (normal setting)
  • SSB, CW, RTTY More than 2.4 kHz/- 6 dB
  • Less than 4.8 kHz/ -60 dB
  • AM/FM-N More than 8.0 kHz/-6 dB
  • Less than 30 kHz/-36 dB
  • FM More than 12 kHz/-6 dB
  • Less than 30 kHz/-60 dB
  •  
  • * Spurious and image rejection ratio:
  • * SSB/CW/AM - More than 70 dB
  • * Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
  • * RIT variable range +/-9.99 kHz
  • * PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
  • * EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms
  • All stated specifications are subject to change without notice or obligation.
    •

     
    • 3) Manufacturer: KENWOOD
    • Item : TS-50S
    • Description : COMPACT 100W HF TCVR 13.8V
    • Price : $689.95
    • Additional information :

    Antenna Impedance 50 ohms
    Dimensions (W x H x D) 7-1/16 x 2-3/8 x 9-3/16 in (179 x 60 x 233 mm)
    Frequency Stability less than ±10x10-6, less than ±0.5x10-6 with SO-2
    Memory Channels 100
    Mode A1A (CW), J3E (SSB), A3E (AM), F3E (FM)
    Operating Temperature Range -20° - 60°C
    Power Consumption Receive 1.45A
    Power Consumption Transmit 20.5A
    Power Requirement 13.8V DC ±15%
    Weight (approx.) 6.4lbs (2.9kg)
    <http://www.elkel.ca/Images/kenwood/transmitter.gif>
    Carrier Suppression more than 40dB
    Frequency Range 10m band 28.0 - 29.7MHz
    Frequency Range 12m band 24.89 - 24.99MHz
    Frequency Range 15m band 21.0 - 21.45MHz
    Frequency Range 160m band 1.8 - 2.0MHz
    Frequency Range 17m band 18.068 - 18.168MHz
    Frequency Range 20m band 14.0 - 14.35MHz
    Frequency Range 30m band 10.1 - 10.15MHz
    Frequency Range 40m band 7.0 - 7.3MHz
    Frequency Range 80m band 3.5 - 4.0MHz
    Frequency response 400 - 2600Hz (less than -10dB)
    Maximum Frequency Deviation ± 5kHz
    Microphone Impedance 600 ohms
    Modulation AM Low Level modulation
    Modulation FM Reactance modulation
    Modulation SSB Balanced modulation
    Output Power AM 25W
    Output Power SSB, CW, FSK, FM 100W
    Spurious Radiation less than -50dB
    Unwanted Sideband Suppression more than 40dB