JPC-12 Antenna Set Up




10m Band
- spike or tripod + counterpoise + feed point + telescopic whip
- full length telescopic whip
- without adjustment SWR will be 1.2 to 1.5

11m Band (CB-Band) )
- spike or tripod + counterpoise + feed point + 1x aluminum pole + telescopic whip
- full length telescopic whip
- without adjustment SWR will be 1.2 to 1.7
- adjust SWR with telescopic whip

12m Band
- spike or tripod + counterpoise + feed point + 2x aluminum poles + telescopic whip
- full length telescopic whip
- without adjustment SWR will be 1.2 to 1.7
- adjust SWR with telescopic whip

15m Band (Ver 1)
- spike or tripod + counterpoise + feed point + 4x aluminum poles + telescopic whip
- all four aluminum poles screwed to the feed point
- mount the telescopic whip on top of the aluminum poles
- insert one section of the telescopic whip
- without adjustment SWR will be 1.2 to 1.5

15m Band (Ver 2)
- spike or tripod + counterpoise + feed point + 3x aluminum poles + telescopic whip
- mount three aluminum poles on the feed point
- mount the full-size telescopic whip on the aluminum poles
- without adjustment SWR will be 1.2 to 1.5

17m Band
- spike or tripod + counterpoise + feed point + 4x aluminum poles + telescopic whip
- full size telescopic whip
- without adjustment SWR will be 1.2 to 1.7
- adjust using telescopic whip

20m Band
- spike or tripod + counterpoise + feed point + 4x aluminum poles + coil + telescopic whip
- full length telescopic whip. Place the coil between the aluminum poles and the telescopic whip
- place the pickup carriage at the red top marker of the coil
- without adjustment SWR will be 1.1 to 1.4
- adjust the SWR with the coil

30m Band
- spike or tripod + counterpoise + feed point + 4x aluminum poles + coil + telescopic whip
- full length telescopic whip
- place the coil between the aluminum poles and the telescopic whip
- place the pickup carriage eight (8) stops under the red top marker of the coil
- without adjustment SWR will be about 1.1 to 1.

40m Band
- spike or tripod + counterpoise + feed point + 4x aluminum poles + coil + telescopic whip
- full length telescopic whip
- place the coil between the aluminum poles and the telescopic whip
- place the pickup carriage at the red bottom marker of the coil
- SWR will be about 1.1 to 1.4
- adjust the SWR with the coil

HOME