ELECRAFT K3        ! Radio type for display in Log-EQF   N3EQF 3/23/2008
0                  ! Update rate in seconds - 0 is fast, while 10 is slow!
                   ! Acknowledge command, if required (leave blank if not)
0                  ! Bytes to receive from radio as OK or ECHO block    
AI0;K22;           ! Pacing or Initialize command, if required
S                  ! Hexadecimal (H) or String (S) instruction data type
F                  ! Commands sent to radio Forward (F) or Reverse (R) order
                   ! -------------- FREQUENCY READ -------------------------
IF;                ! Command to receive operating FREQUENCY from radio
38                 ! Number of bytes expected from radio after FREQ command
3                  ! Starting byte position for FREQUENCY value
11                 ! Number of bytes in FREQUENCY value
F                  ! Frequency decoded in Forward (F) or Reverse (R) order
                   ! BCD (B) or Weighted Binary (W)
                   ! -------------- MODE READ ------------------------------
IF;                ! Command to receive operating MODE from radio
38                 ! Number bytes expected from radio after MODE command
30                 ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
                   ! Bit mask for MODE value, if required
3                  ! Value for CW
1                  ! Value for LSB
2                  ! Value for USB
0                  ! Value for FM
0                  ! Value for AM
0,6,9,7            ! Value for FSK,RTTY,PKT,CW-R
                   ! -------------- FREQUENCY SET --------------------------
FA00000000000;     ! Command to set the operating FREQUENCY --- NOTE: VFO A!
3                  ! Starting byte position for FREQUENCY value
11                 ! Number of bytes in FREQUENCY value
                   ! -------------- MODE SET -------------------------------
MD0;               ! Command to set the operating MODE
3                  ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
3                  ! Value for CW
1                  ! Value for LSB
2                  ! Value for USB
0                  ! Value for FM
0                  ! Value for AM
0,6,9,7            ! Value for FSK,RTTY,PKT,CW-R
                   ! --------------- FILTER SET for CW ---------------------
FW00001;           ! FW00001; =filter 1  FW00002; =filter 2  FW00003; =filter 3
                   ! -------------- FILTER SET for PHONE -------------------
FW00002;           ! FW00001; =filter 1  FW00002; =filter 2  FW00003; =filter 3