[FT-980]           ! Radio Model for display [] for CAT system N3EQF 01/17/98
M                  ! Update rate in seconds, followed by pacing delay
0B00000000         ! Acknowledge command, if required (leave blank if not)
5                  ! Bytes to receive from radio as ECHO or OK block
                   ! Pacing or Initialize command, if required
H                  ! Hexadecimal (H) or String (S) instruction data type
R                  ! Commands sent to radio Forward (F) or Reverse (R) order
                   ! -------------- FREQUENCY READ -------------------------
0000000000         ! Command to receive operating FREQUENCY --> CAT ON <--
148                ! Number of bytes expected from radio after FREQ command
144                ! Starting byte position for FREQUENCY value
4                  ! Number of bytes in FREQUENCY value
R                  ! Frequency decoded in Forward (F) or Reverse (R) order
B,10               ! BCD (B) or Weighted Binary (W)                   
                   ! -------------- MODE READ ------------------------------
0001000000         ! Command to receive operating MODE --> CAT OFF <--
148                ! Number bytes expected from radio after MODE command
143                ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
07                 ! Bit mask for MODE value, if required
02                 ! Value for CW  (USE 02 FOR WIDE, 03 FOR CW-NARROW)
00                 ! Value for LSB
01                 ! Value for USB
07                 ! Value for FM
04                 ! Value for AM  (USE 04 FOR WIDE, 05 FOR AM-NARROW)
06                 ! Value for FSK
                   ! -------------- FREQUENCY SET --------------------------
0800000000         ! Set frequency instruction
2                  ! Starting byte position for FREQUENCY value
4                  ! Number of bytes in FREQUENCY value
                   ! -------------- MODE SET -------------------------------
0A00000000         ! Set mode instruction
2                  ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
12                 ! Value for CW  (USE 12 FOR CW-WIDE, 13 FOR CW-NARROW)
10                 ! Value for LSB
11                 ! Value for USB
17                 ! Value for FM
14                 ! Value for AM  (USE 14 FOR AM-WIDE, 15 FOR AM-NARROW)
16                 ! Value for FSK