Yaesu FT-100       ! Radio Model Number for display -  NOVEMBER 1999 N3EQF
1.0                ! Update rate in seconds or (M) manual update or (N) none
                   ! Acknowledge command, if required (leave blank if not)
0                  ! Bytes to receive from radio as ECHO or OK block
                   ! Pacing or Initialize command, if required
H                  ! Hexadecimal (H) or String (S) instruction data type
R                  ! Commands sent to radio Forward (F) or Reverse (R) order
                   ! -------------- FREQUENCY READ -------------------------
1000000000         ! Command to receive operating FREQUENCY from radio
16                 ! Number of bytes required from radio after FREQ command
2                  ! Starting byte position for FREQUENCY value
4                  ! Number of bytes in FREQUENCY value
F                  ! Frequency decoded in Forward (F) or Reverse (R) order
W,1.25             ! BCD (B) or Weighted Binary (W followed by scale factor)
                   ! -------------- MODE READ ------------------------------
1000000000         ! Command to receive operating MODE from radio
16                 ! Number of bytes required from radio after MODE command
6                  ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
0F                 ! Bit mask for MODE value, if required
2                  ! Value for CW (Use 3 for CW-R, 2 for CW)
0                  ! Value for LSB
1                  ! Value for USB
6                  ! Value for FM (Use 6 for FM, 7 for FM-W)
4                  ! Value for AM
5                  ! Value for FSK  ( Use 6 for PACKET )
                   ! -------------- FREQUENCY SET --------------------------
0A00000000         ! Command to set the operating FREQUENCY
2                  ! Starting byte position for FREQUENCY value
4                  ! Number of bytes in FREQUENCY value
                   ! -------------- MODE SET -------------------------------
0C00000000         ! Command to set the operating MODE
2                  ! Starting byte position for MODE value
1                  ! Number of bytes in MODE value
2                  ! Value for CW (wide) 2 --- For CW-R set to 3
0                  ! Value for LSB
1                  ! Value for USB
6                  ! Value for FM (FM = 6, FM-W = 7)
4                  ! Value for AM
8                  ! Value for FSK