Drake R8 ! Radio type for display in Log-EQF - 12/05/01 - N3EQF 1.0 ! Update rate in seconds - 0 is fast, while 10 is slow! ! Acknowledge command, if required (leave blank if not) 0 ! Bytes to receive from radio as OK or ECHO block ! Pacing or Initialize command, if required S ! Hexadecimal (H) or String (S) instruction data type F ! Commands sent to radio Forward (F) or Reverse (R) order ! -------------- FREQUENCY READ ------------------------- RF^ ! Command to receive operating FREQUENCY from radio 18 ! Number of bytes expected from radio after FREQ command 9 ! Starting byte position for FREQUENCY value 9 ! Number of bytes in FREQUENCY value F ! Frequency decoded in Forward (F) or Reverse (R) order ! BCD (B) or Weighted Binary (W) ! -------------- MODE READ ------------------------------ RM^ ! Command to receive operating MODE from radio 18 ! Number bytes expected from radio after MODE command 4 ! Starting byte position for MODE value 2 ! Number of bytes in MODE value ! Bit mask for MODE value, if required CW ! Value for CW LS ! Value for LSB US ! Value for USB FM ! Value for FM AM ! Value for AM RT ! Value for FSK ! -------------- FREQUENCY SET -------------------------- F 00000000^ ! Command to set the operating FREQUENCY 3 ! Starting byte position for FREQUENCY value 9 ! Number of bytes in FREQUENCY value ! -------------- MODE SET ------------------------------- M0^ ! Command to set the operating MODE 2 ! Starting byte position for MODE value 1 ! Number of bytes in MODE value 4 ! Value for CW 2 ! Value for LSB 1 ! Value for USB 5 ! Value for FM 6 ! Value for AM 3 ! Value for FSK