20 Feb 2021

	About QSL.net
Many people use QSL.net (free of charge) as a digital site and image transmission server, and I am one of them. However, about two years ago, I was suddenly
restricted in the functions that can be used as an image transfer server .

What are the restrictions?
1. Uploaded images are not immediately available. The previous image is displayed. I am checking the image uploaded by TX PopUp, but the
　　PopUp image is the previous image and the uploaded image does not appear immediately.
2. The same applies to the digital site display, and the image received immediately is not displayed and the previous image is displayed.

When building the RXOk system of EasyPal Initially, the system was built using QSL.net, but since the administrator did not use the Web,
Erik said that he started his own server and Richard, the creator of the digital site. I'm listening to you.

Initially, even if the image is displayed well, if you send it by FTP, the access log will remain, so it seems that the user is set to be restricted.
I have already been restricted and cannot use it as an image transfer server.

Many overseas stations have come out in Peanut, but many stations are using QSL.net. When I receive it and
look at the status of the server, the previous image is received many times if it is a quick transmission and reception. Also, the sent image is not displayed easily on the Digisite.

Recently, images larger than necessary are being sent and received, but the load on the server used for the digital site is steadily increasing, and it
takes time to refresh the digital site. If possible, the image to be uploaded to the digital site
may have a certain size of 100KB or less, or something else may need to be restricted . In order to use many free servers continuously for as long as possible , ...

About new mode Q65
According to experiments by JA0AYH, JA2FBE, JA1RCN stations, signal reception is about 2 in T / R15s because Peanut uses the Internet.
It was received with a delay of about a second , and it was not possible to receive with this delay. When I experimented with T / R 30s,
I found that it was almost receivable regardless of the time delay . So I modified the Peanut control so that Easy can be sent and received for 30 seconds.