// IMPORTANT: Adafruit_ILI9341_8bit_AS LIBRARY MUST BE SPECIFICALLY // CONFIGURED FOR EITHER THE TFT SHIELD OR THE BREAKOUT BOARD. // DEFAULT IS THE UNO SHIELD // SEE RELEVANT COMMENTS IN Adafruit_ILI9341_8bit_AS.h FOR SETUP. #define DEBUG #include // Core graphics library #include // Hardware-specific library // The control pins for the LCD can be assigned to any digital or // analog pins...but we'll use the analog pins as this allows us to // double up the pins with the touch screen (see the TFT paint example). #define LCD_CS A3 // Chip Select goes to Analog 3 #define LCD_CD A2 // Command/Data goes to Analog 2 #define LCD_WR A1 // LCD Write goes to Analog 1 #define LCD_RD A0 // LCD Read goes to Analog 0 #define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin // When using the BREAKOUT BOARD only, use these 8 data lines to the LCD: // For the Arduino Uno, Duemilanove, Diecimila, etc.: // D0 connects to digital pin 8 (Notice these are // D1 connects to digital pin 9 NOT in order!) // D2 connects to digital pin 2 // D3 connects to digital pin 3 // D4 connects to digital pin 4 // D5 connects to digital pin 5 // D6 connects to digital pin 6 // D7 connects to digital pin 7 // For the Arduino Mega, use digital pins 22 through 29 // (on the 2-row header at the end of the board). // Assign human-readable names to some common 16-bit color values: #define BLACK 0x0000 #define BLUE 0x001F #define RED 0xF800 #define GREEN 0x07E0 #define CYAN 0x07FF #define MAGENTA 0xF81F #define YELLOW 0xFFE0 #define WHITE 0xFFFF Adafruit_ILI9341_8bit_AS tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET); // If using the shield, all control and data lines are fixed, and // a simpler declaration can optionally be used: // Adafruit_ILI9341_8bit_AS tft; void setup(void) { #ifdef DEBUG Serial.begin(9600); Serial.println("TFT LCD test"); Serial.print("TFT size is "); Serial.print(tft.width()); Serial.print("x"); Serial.println(tft.height()); #endif // DEBUG tft.reset(); delay(10); tft.begin(0x9341); #ifdef DEBUG Serial.println("Benchmark Time (microseconds)"); Serial.print("Screen fill "); Serial.println(testFillScreen()); delay(500); Serial.print("Text "); Serial.println(testText()); delay(3000); Serial.print("Lines "); Serial.println(testLines(CYAN)); delay(500); Serial.print("Horiz/Vert Lines "); Serial.println(testFastLines(RED, BLUE)); delay(500); Serial.print("Rectangles (outline) "); Serial.println(testRects(GREEN)); delay(500); Serial.print("Rectangles (filled) "); Serial.println(testFilledRects(YELLOW, MAGENTA)); delay(500); Serial.print("Circles (filled) "); Serial.println(testFilledCircles(10, MAGENTA)); Serial.print("Circles (outline) "); Serial.println(testCircles(10, WHITE)); delay(500); Serial.print("Triangles (outline) "); Serial.println(testTriangles()); delay(500); Serial.print("Triangles (filled) "); Serial.println(testFilledTriangles()); delay(500); Serial.print("Rounded rects (outline) "); Serial.println(testRoundRects()); delay(500); Serial.print("Rounded rects (filled) "); Serial.println(testFilledRoundRects()); delay(500); Serial.println("Done!"); #endif // DEBUG } void loop(void) { for(uint8_t rotation=0; rotation<4; rotation++) { tft.setRotation(rotation); testText(); delay(2000); } testFilledRoundRects(); testRoundRects(); testFilledTriangles(); testTriangles(); testCircles(10, WHITE); testFillScreen(); testText(); testLines(CYAN); testFastLines(RED, BLUE); testRects(GREEN); testFilledRects(YELLOW, MAGENTA); testFilledCircles(10, MAGENTA); } unsigned long testFillScreen() { unsigned long start = micros(); tft.fillScreen(BLACK); tft.fillScreen(RED); tft.fillScreen(GREEN); tft.fillScreen(BLUE); tft.fillScreen(BLACK); return micros() - start; } unsigned long testText() { tft.fillScreen(BLACK); unsigned long start = micros(); tft.setCursor(0, 0); tft.setTextColor(WHITE); tft.setTextSize(1); tft.println("Hello World!"); tft.setTextColor(YELLOW); tft.setTextSize(2); tft.println(1234.56); tft.setTextColor(RED); tft.setTextSize(3); tft.println(0xDEADBEEF, HEX); tft.println(); tft.setTextColor(GREEN); tft.setTextSize(5); tft.println("Groop"); tft.setTextSize(2); tft.println("I implore thee,"); tft.setTextSize(1); tft.println("my foonting turlingdromes."); tft.println("And hooptiously drangle me"); tft.println("with crinkly bindlewurdles,"); tft.println("Or I will rend thee"); tft.println("in the gobberwarts"); tft.println("with my blurglecruncheon,"); tft.println("see if I don't!"); return micros() - start; } unsigned long testLines(uint16_t color) { unsigned long start, t; int x1, y1, x2, y2, w = tft.width(), h = tft.height(); tft.fillScreen(BLACK); x1 = y1 = 0; y2 = h - 1; start = micros(); for(x2=0; x20; i-=6) { i2 = i / 2; start = micros(); tft.fillRect(cx-i2, cy-i2, i, i, color1); t += micros() - start; // Outlines are not included in timing results tft.drawRect(cx-i2, cy-i2, i, i, color2); } return t; } unsigned long testFilledCircles(uint8_t radius, uint16_t color) { unsigned long start; int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2; tft.fillScreen(BLACK); start = micros(); for(x=radius; x10; i-=5) { start = micros(); tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, tft.color565(0, i, i)); t += micros() - start; tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, tft.color565(i, i, 0)); } return t; } unsigned long testRoundRects() { unsigned long start; int w, i, i2, cx = tft.width() / 2 - 1, cy = tft.height() / 2 - 1; tft.fillScreen(BLACK); w = min(tft.width(), tft.height()); start = micros(); for(i=0; i20; i-=6) { i2 = i / 2; tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0)); } return micros() - start; }