//Code By A.Tedds.
//Adafruit Library Files

//Usage of tft.drawRect(start position 0-240,0-320,size 0-240,size 0-320, Color)

#include <Adafruit_GFX_AS.h>    // Core graphics library
#include <Adafruit_ILI9341_8bit_AS.h> // Hardware-specific library

#define LCD_CS A3 // Chip Select goes to Analog 3
#define LCD_CD A2 // Command/Data goes to Analog 2
#define LCD_WR A1 // LCD Write goes to Analog 1
#define LCD_RD A0 // LCD Read goes to Analog 0
#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin


// Assign human-readable names to some common 16-bit color values:

// With Changes for inversion !!

#define	BLACK   0xFFFF
#define	BLUE    0xFFE0
#define	GREEN   0xF81F
#define CYAN    0xF800
#define GRAY1	0x8410  
#define	RED     0x07FF
//define BRIGHT_RED 0x????
#define GRAY2	0x4208
#define MAGENTA 0x07E0
#define YELLOW  0x001F
#define WHITE   0x0000


Adafruit_ILI9341_8bit_AS tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);



void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}