#include <Adafruit_GFX_AS.h>    // Core graphics library
#include <Adafruit_ILI9341_8bit_AS.h> // Hardware-specific library

#define LCD_CS A3 // Chip Select goes to Analog 3
#define LCD_CD A2 // Command/Data goes to Analog 2
#define LCD_WR A1 // LCD Write goes to Analog 1
#define LCD_RD A0 // LCD Read goes to Analog 0
#define LCD_RESET A4 // Can alternately just connect to Arduino's reset pin


// Assign human-readable names to some common 16-bit color values:
// With Changes for inversion !!

#define	BLACK   0xFFFF
#define	BLUE    0xFFE0
#define	GREEN   0xF81F
#define CYAN    0xF800
#define GRAY1	0x8410  
#define	RED     0x07FF
//define BRIGHT_RED 0x????
#define GRAY2	0x4208
#define MAGENTA 0x07E0
#define YELLOW  0x001F
#define WHITE   0x0000


Adafruit_ILI9341_8bit_AS tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);

void setup() 
{
  
}

void loop() 
{
// find the TFT display
digitalWrite
uint16_t identifier = tft.readRegister(0x0);
if (identifier == 0x9325) 
{
   Serial.println("Found ILI9325");
} 
else if (identifier == 0x9328) 
{
   Serial.println("Found ILI9328");
} 
else 
{
   Serial.print("Unknown driver chip ");
   Serial.println(identifier, HEX);
   while (1);
  
}   
}