//int led1 = 1;
//int led2 = 2;
//int led3 = 3;
//int led4 = 4;
//int led5 = 5;
//int led6 = 6;
//int led7 = 7;
//int led8 = 8;
//int led8 = 8;
//int led9 = 9;
//int led10 = 10;
//int led11 = 11;
//int led12 = 12;
//int led13 = 13;
//int led14 = 14;
//int led15 = 15;


// the setup routine runs once when you press reset:
void setup()
{
  // initialize all the pins as an output.
  for (int led=1; led<15;led++)
  pinMode(led, OUTPUT);
}

// the loop routine runs over and over again forever:
void loop()
{
 {
   for (int led=1; led<15;led++) 
  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(200);               // wait for 1 second in mS
  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
  delay(200);  // wait for 1 second in mS
 }
}