GuindaSoft 
	IC7000PROG
	IC7100PROG
	IC7200PROG
	R75PROG
	R8500PROG 
can read and write the memory channesls of the related ICOM transceivers.
You can modify, load and save the data on CSV files.

Connect a PC serial port (or USB) 
with the RS232 port of the transceiver using a "straight" RS232 cable (not "cross" or "null-modem" cable)
or 
with the CI-V port with a CT-17 cable
or
with the CI-V port using a CI-V/RS232 or a CI-V/USB converter.


Press the CONNECT button and select the transceiver address, the PC port and the baud rate.

Press the READ button to read the memory channels FROM the transceiver.

Press the WRITE button to write the memory channels TO the transceiver.

Double-Click on the Channel column will select the memory on the transceiver.


==========================================================================
IMPORTANT INSTALLATION NOTE:
==========================================================================
If the program starts with an error message, 
run the first time "As Administrator"
==========================================================================
If at the first start, the message:
"Failed to create empty document" 
is displayed, press OK.
Then, when the message 
"Do you wanto to allow the following program to make changes to this computer?"
is displayed, press YES.
Now, the installation will be completed.
==========================================================================


This program is released for non commercial use.
The author cannot be held responsible for any kind of damage that occurs while using this program in any way.

http://www.qsl.net/iz2nxf
