Subject: Re: SX-28 output transformer
From: "Denis Kuwahara" <[email-masked]>
Date: Fri, 14 May 1999 00:37:22 GMT
Newsgroups: rec.radio.amateur.boatanchors,rec.antiques.radio+phono

The output transformer shown for an SX-28-A is 10K CT, 5000, tapped at
500, and 100 ohms.  part no 55B009

[email-masked] wrote:
> 
> I have just started a restoration project for an Hallicrafters SX-28
> (no 'A', no 'MIL').
> 
> Unfortunately the output transformer is not original. The rig has been
> handled by many people and I am trying to get rid of all the mods
> introduced...
> 
> Any suggestion on how to replace it (other than getting a new one from
> the various BA sources)?
> Can I find a way to convert the radio to work with an 8 ohms
> loudspeaker? (this is in contrast with my objective to restore the
> radio as it was,... but no money is left for an original 5000 ohms
> speaker :=) )
> 
> Thank you very much
> 
> ciao
> 
> --== Sent via Deja.com http://www.deja.com/ ==--
> ---Share what you know. Learn what you don't.---