Date: Thu, 15 Jun 89 14:11:38 PDT
From: beekman%a1_utrop2.DEC@decwrl.dec.com
Subject: Trio - Kenwood TS430 extended coverage

Author: Wim Beekman
Date:   25-Oct-1988
Posted-date: 25-Oct-1988


================================================================================
                           TRIO-KENWOOD mods and remarks
                        -< Include 0-150kHz on your TS430 >-
--------------------------------------------------------------------------------

This modification is to include the receiving range from
the TS430 from 0-150 kHz.

Connect a resistor from 1K from IC1 pin 14 to ground in
the PLL Unit.

(Pin 14 from IC1 goes to the base of a transistor.)

The best way to do this, is by soldering the resistor at
the solder side of the PLL Unit PCB.


Peter  -PA3AEF-


