FT727-R RESET OPTIONS
                   =====================

I have received a small addendum to the official German manual which lists
frequency ranges on VHF and UHF which may be programmed into the rig:

VHF range shift step    UHF range shift step    code
------------------------------------------------------
100-200     0   5/10    400-500     0   12.5/25 001111
144-146     0   10/20   430-440     5.0 10/20   002222
......................................................
144-146     0   10/20   430-440     5.0 10/20   003333
144-154 RX only 10/20
......................................................
144-148   0.6   12.5/25 430-440     7.6 12.5/25 005555
144-148   0.6   5/10    440-450     5.0 12.5/25 007777
144-146   0.6   12.5/25 430-440     1.6 12.5/25 009999

codes 000000, 004444, 006666, and 008888 cause an ERR to be displayed.

The ranges 100-200 and 400-500 MHz (code 001111) cannot be used to their full
extent, even though the frequencies are displayed. The published technical
data, however, indicates functions are maintained in an approximate range of
142-154 and 420-460 MHz.

Combinations with no repeater shift specified, or with the wrong shift, may
be reprogrammed with the usual function F(unc) + SHIFT.

I thought everybody got this leaflet! If not, enjoy. If you have more to say
about the rig, you are welcome to append.

73, Martin DL3ZAW

(Downloaded from GB7SYP)