Yaesu FT-470 crossband repeater function
               ========================================

If you turn on the radio with the RPT key depressed, the radio becomes a
crossband repeater.

Dial up two frequencies you want to crosslink (be sure to pay attention to
transmit offsets, if any), turn the radio off, depress the RPT key, and turn
it back on.

The tone encode/decode flags and the -+ flags will be flashing and when
either band's squelch opens, the other band is moved into the primary
frequency display and the transmitter keys.

Note that the power output is decreased to LOW power.

Further note: the crossband audio isn't great, probably because it's whatever
comes out the speaker and gets fed back into the mike.  I suppose if you got
serious, you could create a short interface cable to plug into the top of the
radio.

Collier Chun NM7B @ WA7ARI

Sysop note: This may be useful for RAYNET purposes, but for other users it
is a forbidden mode of operation.

(Downloaded from GB7SYP)