FT-101xx MK3 - clarifier
                 ========================

My FT101ZD Mk3 clarifier knob rotated in the opposite sense to the main
tuning knob when requiring either an increase or a decrease in frequency.

This wasn't satisfactory as the two should agree in direction.:
i.e. both should turn clockwise for an increase in freq.
     and
     turn counter-clockwise for a decrease in freq.

If your FT101xx has opposites, then:

1:Remove bottom lid section.
  This reveals rear of clarifier/squelch control pots.
2:Remove knobs from spindles of pots.
  This makes it easier to re-wire the pot and saves you melting insulation on
  the wiring.
3:Remove the pots from the front panel.
  Gently bring them out into the open to ease soldering.
4:Interchange the two outer wires (in my case Purple <> Green) on the REAR
  POT.
  The other 'half' pot has a screened pair going to it.
5:Refitting is the reverse of removal.

73 Paul EI7GM @ EI5CI

(Downloaded from GB7SYP)