Alinco DR-110T frequency expansion
                       ==================================

    To  broadband the DR-110T, while holding the "F" and "VFO/M" keys  down,
    turn  off  the power and then turn it back on (still holding the  keys).
    The  radio  now  has  factory programming reset -  you  just  lost  your
    memories  but  at least mine now transmits and receives from  130MHz  to
    169MHz.

    Before  you do this, remove the top cover - notice the long (2  inchish)
    loop  of  yellow wire coming off the back of the front panel - clip  it!
    NOW - after resetting the microprocessor - press the "F" key, then press
    the  "MHz" key (mine now says 370). press the "f" key again, then  press
    the  "MHz" key again - (mine now says 870!). Mine will scan from 870.000
    to 889.995MHz.

    I  selected  a 15kHz step because the channel spacing in this  range  is
    30kHz. Toggle the "F" and "Mhz" keys and you're back at 144MHz.

    73 Carty KA2Y

    ========================================================================


    (Downloaded from GB7SYP)