ModuleDtmfRepeater.conf - Configuration file for the SvxLink server DTMF
Repeater module
DESCRIPTION
svxlink is a general purpose voice service system for ham radio use. This
man-page describe the SvxLink server configuration for the DTMF Repeater module.
The DTMF Repeater module retransmits all received DTMF digits. This can be used
to control remote systems that is also DTMF controlled. The DTMF muting feature
should be used on a repeater to not retransmit the received DTMF audio.
CONFIGURATION VARIABLES
There are a couple of configuration variables that are common to all modules.
The documentation for these can be found in the svxlink.conf(5) manual page. The
amplitude, tone length and tone spacing of the generated DTMF digits is
configured in the configuration section for the LocalTx that is actually
transmitting the DTMF. Have a look at the documentation for the DTMF_TONE_*
configuration variables for a full explanation. Here is the description of all
module specific configuration variables that the SvxLink DtmfRepeater module
understands.
ModuleDtmfRepeater
REPEAT_DELAY
Specify a time, in milliseconds, that the DTMF Repeater module will wait
after squelch close before retransmitting received DTMF digits. If zero or
not specified, SvxLink will try to send the digits as soon as they are
received.