####################################################################
#  DK7XE-6 APRX default config file                                #
#------------------------------------------------------------------#
#  will be copied to /tmp/ and used only if no other config        #
#  file exists there.                                              #
#------------------------------------------------------------------#
#  last edited: 14.05.2013 - 06:17CET                              #
####################################################################
#--------1234567890123456789012345678901234567890 		
# the two lines below are read out by the aprx start up script and print out to display and log file.  
#Display: DK7XE-6 APRX default config
#Display: IGATE RX-ON / RF ON / DIGI W1

# the section below is the "normal" APRX configuration as described on the APRX webpage. no own magics anymore ;-)

mycall  DK7XE-6

<aprsis>
	server    euro.aprs2.net    14580
</aprsis>

<logging>
	pidfile /var/run/aprx.pid
	rflog /var/log/aprx/aprx-rf.log
	aprxlog /var/log/aprx/aprx.log
	erlangfile /var/log/aprx/aprx.state
</logging>


<interface>
   serial-device /dev/OTportA  115200 8n1    KISS
#   callsign     $mycall  # callsign defaults to $mycall
   tx-ok	true    # transmitter enable defaults to false
</interface>

<beacon>
	cycle-size  30m
	beacon symbol "R&" lat "5342.15N" lon "00943.42E" comment "PHG2130/W1 http://APRSbox.dk7xe.de - OV M21" via "WIDE2-2"
</beacon>

#<telemetry>
#	transmitter	$mycall
#	via		LOCAL
#	source		$mycall
#</telemetry>

<digipeater>
    transmitter     $mycall
    <source>
        source       $mycall
	 relay-type	directonly
	 viscous-delay  5
    </source>
</digipeater>