password

How To Use Phone Patch

W1EE/R REPEATER

STAMFORD CT. 146.655 PL-100Hz

CODES ARE FOR MEMBERS ONLY !

The codes and procedures to access the repeater's features are described in this guide. Your cooperation is requested in keeping the codes confidential. These features are intended for SARA members only. Do not divulge the codes to anyone who in not a member. If a non- member asks you for the codes, encourage them to join SARA.

AUTOPATCH CODES

701 Regular Autopatch

702 Westchester Autopatch

300-399 Speed Dial Numbers

910-919 Emergency Autopatch

# Patch Clear Code

EMERGENCY AUTOPATCH - The emergency autopatch is available 24 hours a day with no PL required for its use at any time. To dial one of the emergency services on the emergency autopatch list, you should first idenify your station and indicate that you are accessing the emergency patch. Without unkeying your transmitter, enter the three digit code for the service you wish to call. After entering the three digit code unkey and wait for the repeater to put the call through for you. The repeater will indicate in voice the emergency service you are calling. To terminate the emergency autopatch simply enter the Patch Clear Code #

EMERGENCY AUTOPATCH NUMBERS

910 State Police

911 Stamford Police

912 Stamford Fire

913 Greenwich Police

914 Greenwich Fire

915 Darien Police

916 Stamford EMS

917 US Coast Guard

918 Norwalk Police

919 New Canaan Police

The EMERGENCY Patch Is Always On.

REGULAR AUTOPATCH - The regular autopatch is subdivided into two states, depending on whether a control operator is monitoring the repeater and the time of day.

INDIVIDUAL SPEED DIAL - Between the hours of 6:30 am and 11:30 pm daily, members can use the autopatch to call the number stored in their speed dial slot. In order to access this autopatch you must be transmitting a 100 Hz PL tone. The user merely idenifies as normal when using the autopatch and enters the three digit speed dial number. A few seconds after unkeying, the repeater will dial the number which has been stored in the speed dial slot and the autopatch continues as any normal autopatch would. To terminate the patch enter the Patch Clear Code #

When the repeater is in this mode the ID sent by thr repeater is "W1EE/R" transmitted in CW.

Every member is intitled to one speed dial number. To optain a speed dial number contact the trustee.

FULL AUTOPATCH - When the control operator is monitoring the repeater will be in full autopatch to all available to members. To access the patch the member should identify, enter the autopatch access code and then the number you wish to call without unkeying your transmitter. Remember, if you are calling a number outside Stamford the number should be preceded by a 1. You will not hear a dial tone but the repeater will repeat the number you are calling. To terminate the autopatch simply enter the Patch Clear Code #

If you call a number outside the Stamford dialing area please check with the Treasurer at the next meeting to settle you account. The autopatch will not allow you to call a number outside of the 203 area code or the 914 area code if you access the Westchester Autopatch.

When the repeater is in this mode the ID sent by the machine is "W1EE Autopatch On" in voice.

LONG SISTANCE CALLS - When ever an autopatch is made outside the local Stamford dialing area, a long distance charge is imposed. This applies to calls made with the speed dial number, through the regular autopatch and obviously, through the Westchester Patch. Please reimburse the Treasurer for these calls. Failure to do so will result in the loss of the autopatch.

EMERGENCY PROCEDURES - KEEP IT SHORT - Most of the people you speak to are civilian dispatchers. When you are first connected to the emergency service, briefly tell them you are calling by radio and cannot hear them until you stop speaking. Then briefly give them the nature of the problem and the location and wait for questions.

Be sure of the facts and relate them as concisely as possible. Accurately state the location of the incident and whether you know if any injuries are involved.



		How To Use Phone Patch W1EE/R REPEATER STAMFORD CT. 146.655 PL-100Hz CODES ARE FOR MEMBERS ONLY !

	The codes and procedures to access the repeater's features are described in this guide. Your cooperation is requested in keeping the codes confidential. These features are intended for SARA members only. Do not divulge the codes to anyone who in not a member. If a non- member asks you for the codes, encourage them to join SARA.

AUTOPATCH CODES 701 Regular Autopatch 702 Westchester Autopatch 300-399 Speed Dial Numbers 910-919 Emergency Autopatch # Patch Clear Code EMERGENCY AUTOPATCH - The emergency autopatch is available 24 hours a day with no PL required for its use at any time. To dial one of the emergency services on the emergency autopatch list, you should first idenify your station and indicate that you are accessing the emergency patch. Without unkeying your transmitter, enter the three digit code for the service you wish to call. After entering the three digit code unkey and wait for the repeater to put the call through for you. The repeater will indicate in voice the emergency service you are calling. To terminate the emergency autopatch simply enter the Patch Clear Code # EMERGENCY AUTOPATCH NUMBERS 910 State Police 911 Stamford Police 912 Stamford Fire 913 Greenwich Police 914 Greenwich Fire 915 Darien Police 916 Stamford EMS 917 US Coast Guard 918 Norwalk Police 919 New Canaan Police The EMERGENCY Patch Is Always On. REGULAR AUTOPATCH - The regular autopatch is subdivided into two states, depending on whether a control operator is monitoring the repeater and the time of day. INDIVIDUAL SPEED DIAL - Between the hours of 6:30 am and 11:30 pm daily, members can use the autopatch to call the number stored in their speed dial slot. In order to access this autopatch you must be transmitting a 100 Hz PL tone. The user merely idenifies as normal when using the autopatch and enters the three digit speed dial number. A few seconds after unkeying, the repeater will dial the number which has been stored in the speed dial slot and the autopatch continues as any normal autopatch would. To terminate the patch enter the Patch Clear Code # When the repeater is in this mode the ID sent by thr repeater is "W1EE/R" transmitted in CW. Every member is intitled to one speed dial number. To optain a speed dial number contact the trustee. FULL AUTOPATCH - When the control operator is monitoring the repeater will be in full autopatch to all available to members. To access the patch the member should identify, enter the autopatch access code and then the number you wish to call without unkeying your transmitter. Remember, if you are calling a number outside Stamford the number should be preceded by a 1. You will not hear a dial tone but the repeater will repeat the number you are calling. To terminate the autopatch simply enter the Patch Clear Code # If you call a number outside the Stamford dialing area please check with the Treasurer at the next meeting to settle you account. The autopatch will not allow you to call a number outside of the 203 area code or the 914 area code if you access the Westchester Autopatch. When the repeater is in this mode the ID sent by the machine is "W1EE Autopatch On" in voice. LONG SISTANCE CALLS - When ever an autopatch is made outside the local Stamford dialing area, a long distance charge is imposed. This applies to calls made with the speed dial number, through the regular autopatch and obviously, through the Westchester Patch. Please reimburse the Treasurer for these calls. Failure to do so will result in the loss of the autopatch. EMERGENCY PROCEDURES - KEEP IT SHORT - Most of the people you speak to are civilian dispatchers. When you are first connected to the emergency service, briefly tell them you are calling by radio and cannot hear them until you stop speaking. Then briefly give them the nature of the problem and the location and wait for questions. Be sure of the facts and relate them as concisely as possible. Accurately state the location of the incident and whether you know if any injuries are involved.