Yaesu FT-1000MP Mark V Specifications
| GENERAL | 0 |
|
RX Frequency Range:
|
100 kHz ~ 30 MHz |
|
TX Frequency Ranges:
|
160 ~ 10 m (Amateur bands only) |
|
Frequency Stability:
|
?.5 ppm (after 1 min. @ 25 ˇăC) |
|
0
|
?.25 ppm (after 1 min. @ 25 ˇăC, w/TCXO-6) |
|
Operating Temperature Range:
|
-10 ˇăC ~ +50 ˇăC |
|
Emission Modes:
|
LSB, USB, CW, FSK, AFSK, AM, FM |
|
Frequency Steps:
|
0.625/1.25/2.5/5/10 Hz for SSB,CW, RTTY & Packet |
|
0
|
100 Hz for AM and FM |
|
Antenna Impedance:
|
16.6 ~ 150 Ohms, unbalanced (Tuner ON, TX only) |
|
Power Consumption:
|
13.8 VDC | 30 VDC |
|
RX (no signal)
|
2.3 A | - |
|
RX (signal)
|
2.7 A | - |
|
TX (200 W)
|
2.2 A | 14.5 A |
|
Supply Voltage:
|
30 VDC and 13.8 VDC (FP-29) |
|
Dimensions (WHD):
|
16" x 5.3" x 13.7" (410 x 135 x 347 mm) |
|
Weight (approx.):
|
31 lbs. (14 kg.) |
|
0
|
|
|
TRANSMITTER
|
0 |
|
Power Output:
|
Adjustable up to 200 watts (50 watts AM carrier), |
|
Class A mode (SSB):
|
75 watts maximum |
|
Duty Cycle :
|
100% @ 100 watts, |
|
0
|
50% @ 200 watts (FM & RTTY, 3-minute TX) |
|
Modulation Types : SSB:
|
J3E Balanced, |
|
AM:
|
A3E Low-level (early stage), |
|
FM:
|
F3E Variable reactance, |
|
AFSK:
|
J1D, J2D Audio frequency shift keying |
|
Maximum FM Deviation:
|
?.5 kHz |
|
FSK Shift Frequencies:
|
170, 425 and 850 Hz |
|
Packet Shift Frequencies:
|
200 and 1000 Hz |
|
Harmonic Radiation:
|
Better than -60 dB (Typical) |
|
SSB Carrier Suppression:
|
At least 40 dB below peak output |
|
Undesired Sideband Suppression:
|
At least 55 dB below peak output |
|
Audio Response (SSB):
|
Not more than -6 dB from 400 to 2600 Hz |
|
3rd-order IMD:
|
- 31 dB @ 200 watts PEP, or better |
|
0
|
(Class A mode) - 50 dB @ 75 watts PEP (Typical) |
|
Microphone Impedance:
|
500 to 600 Ohms |
| 0 | |
| RECEIVER | 0 |
|
Circuit Type:
|
Quad-conversion superheterodyne (triple conversion for FM) |
|
Intermediate Frequencies:
|
0 |
|
Main RX:
|
70.455 MHz/8.215 MHz/455 kHz, |
|
Sub RX:
|
47.21 MHz/455 kHz |
| Sensitivity : | ||
|
Modes
|
0.5 - 1.8 MHz | 1.8 - 30 MHz |
|
SSB/CW (2.0 kHz)
|
2 uV | 0.16 uV |
|
AM (6 kHz)
|
13 uV | 2 uV |
|
FM
|
- | 0.5 uV |
| (with preamp on, IDBT on, SSB/CW/AM for 10 dB S/N, FM for 12 dB SINAD, 0 dB u = 1 uV) | ||
| Selectivity (-6/-60 dB) : | |||
|
BandWidth
|
Modes | Min. -6 dB BW | Max. -60 dB |
| BW | |||
|
2.4 kHz
|
all except FM | 2.2 kHz | 4.2 kHz |
|
2.0 kHz
|
all except FM | 1.8 kHz | 3.6 kHz |
|
500 Hz
|
CW/RTTY/Packet | 500 Hz | 1.8 kHz |
|
250 Hz
|
CW/RTTY/Packet | 250 Hz | 700 Hz |
|
0
|
AM (Wide) | 4 kHz | 14 kHz |
|
0
|
FM | 8 kHz | 19 kHz |
|
IF Rejection (1.8 ~ 30 MHz):
|
80 dB or better (Main RX), 60 dB or better (Sub Rx) |
|
Image Rejection (1.8 ~ 30 MHz):
|
80 dB or better (Main), 50 dB or better (Sub) |
|
Maximum Audio Output:
|
2.0 W into 4 Ohms with <10 % THD |
|
Audio Output Impedance:
|
4 to 8 Ohms |
| 0 | |
|
FP-29 Specifications
|
0 |
|
DC Output Voltage/Current:
|
+30 V: 15 A; +13.8 V: 3 A |
|
Input Voltage:
|
AC 100-120 V, 50-60 Hz |
|
0
|
AC 200-240 V, 50-60 Hz |
|
Current Consumption (Approx.):
|
AC 100-120 V: 9 A, AC 200-240 V: 5 A |
|
Operating Temperature Range:
|
-10ˇăC ~ +50ˇăC |
|
Case Size (W x H x D):
|
4.2"x 5.3"x 13" (106 x 135.5 x 331 mm) |
|
Weight (Approx.):
|
7 lbs.(3.2 kg.) |
| 0 | |
| Specifications are subject to change, in the interest of technical improvement, without notice or obligation. | |