VX5R的扩频资料
1G开头是在01年5月生产,属笫三版本,放频只需短接笫6点其他不用短接,後按Mr-VFO-4+power重置机器便可,试试
Mars/Cap or Freeband Modification For 3rd Generation VX-5R's
1) Remove Battery
2) Remove the Sticker/Cover for the Pressure Sensing Unit (SU-1)
3) Remove the SU-1 Pressure Sensing Unit Option Board (if installed)
4) Factory Configuration for USA VX-5R usually looks like X X X O O X X X (X = No Solder Ball O = Solder Ball)
5) For Mars/Cap, Remove The 4th Solder Ball and Solder A Ball on the 6th Jumper (see note below) - Your jumpers should look like this X X X X O O X X
6) For Freeband, Remove The 4th & 5th Solder Balls and Solder A Ball on the 6th Jumper - Your jumpers should look like this X X X X X O X X
7) Reassemble Radio and Reset The Radio (Pwr-Mr-VFO-4) - You will loose all stored memory channels and custom settings and the radio is now modified Specific information on all 8 solder jumpers can be found here.
Mars/Cap Modification Will Expanded Transmit Frequencies
to: 50Mhz
to 54Mhz 140Mhz
to 174Mhz 420Mhz
to 470Mhz
Freeband Modification Will Expanded Transmit Frequencies
to: 48Mhz
to 69.995Mhz 108Mhz
to 221.995Mhz 300Mhz
to 579.9875Mhz