**** IMPORTANT **** IMPORTANT **** IMPORTANT ****
**** !!!! PLEASE READ !!!! **** 


SHUT DOWN UI-VIEW32 AND ANY UNNEEDED 
APPLICATIONS SUCH AS PRECISION MAPPING
STREETS AND TRAVELER 7.0 BEFORE 
PROCEEDING WITH THIS INSTALLATION!

IF YOU HAVE USED A PREVIOUS VERSION OF 
PMAPSERVER7 SINCE YOU LAST REBOOTED YOUR
PC, PLEASE REBOOT BEFORE INSTALLING THIS 
VERSION.

It is absolutely essential that you purchase, install
and register a copy of Precision Mapping Streets 7.0 
on your computer before installing PMapServer7!  This 
is a requirement of the Ui-View32 development licence 
from UnderTow Software. 
 
It is absoultely essential that you install, register 
and run Ui-View32 version 2.03 before proceeding with 
this install

Failure to follow the above instructions will result 
in portions of the required programs to fail or to not
perform as intended.

Please read the the detailed installation instructions
included below.  These will also be placed in your 
PMapServer7 installation directory.  If you do not 
follow these instructions, the installation may fail
or not perform as intended.


You will no longer be required to register PmapServer7 
with Undertow Software as in previous versions of 
PMapServer. 

When you have successfully installed PmapServer7, 
the next time you start UI-View32, there will be a map
in the Map, Load Maps dialog called 
"Precision Mapping V7 Server".

The first time you select this map, you may be asked
to browse to your Precision Mapping V7 program folder, 
so that PmapServer7 can work out the location of the 
Precision Mapping Streets and Traveler 7.0 data files.

Further configuration can be done at any time via the
PmapServer7 Control Panel, which is accessed via the 
UI-View32 Map, Control Panel option. The Control Panel
also provides access to the PmapServer6 help file.

Contents of README.Text included with PMapServer7.

Installation instructions:

1.  Ui-View32 vers 2.03 must be installed and registered
	on the Target machine.

2.  Precision Mapping Streets and Traveler 7.0 must be 
	installed and Registered on the Target Machine.  

3.  Shut down Ui-View32 and any other non-essential 
	programs.

4.  REBOOT your machine if Ui-View or Precision Mapping
	Streets and Traveler 7.0 has been run since
	the last reboot.  

    	Better yet, just REBOOT before beginning the 
	PMapServer7 install!

    	If you have Windows automatically start Ui-View32 
	after a restart please disable this feature before 
	proceeding with the install.

5.  Open the PMapServer70x.zip file:
 	If you are using WinZip or a similar program, 
	double click on Setup.exe to begin the install.

	If you are using the default windows unzip 
	utility, extract the contents of th zip file to 
	a directory of your choosing and then run 
	setup.exe from that directory.

6.  Follow the installer instructions.  It is STRONGLY 
	recommended you use the default paths to install 
	PMapServer7.

7.  Please read all information displayed by the installer.

8.  When prompted to launch the application, please do so.


After the install:
1.  Run Ui-View32

2.  Select Map, LoadMap from the main menu.

3.  Select Precision Mapping V7 Server from the list.

4.  Follow the prompts to select data directories etc.
    	If you used the default install for PMap Streets 
    	and Traveler 7.0 Ui-View will display the open 
    	file dialog with this directory selected.  Just 
    	open it, and all directories will be set 
    	automatically.

// Following options required if you use UI-NWS, 
// NWSGet, or PMap Underlays:

5.  Select Map, Control Panel in Ui-View32.

6.  Set Options, White Background checked.

7.  Set Options, Shade MCD, Shade PLaces, Shade Counties,
	Shade States off
 
Note:  Your C:\Program Files\Peak Systems\PMapServer7\PMap Underlays\ 
	directory will be empty.  You need to put some 
	underlay files in it etc.

	If you are using NWSGet, set the NWSGet target
	directory to C:\Program Files\Peak Systems\PMapServer7\PMap Underlays. 
 
	In this PMapServer7 version, all underlays are 
	expected to have a white background.  This may 
	change in a future version to use the color 
	found at the lower left corner of the underlay
	as the transparent color.
 
8.  If desired, Select Underlays, Load Underlay and one 
	of your underlays.
Note:  	Only one Underlay can be selected at a time.
	You can clear Underlays from the map by 
	unchecking the selected Underlay.


9.  Close the control panel
 
Notes:  

One command in Ui-View has changed with PMapServer7.  
Previously, <ctrl> A caused the map to zoom to show 
the USA.  In PMapServer7 it now zooms to show the 
entire world.  

The behaviour observed when loading an underlay has 
changed.  Previous versions of PMapServer automatically 
zoomed the map to show the entire underlay.  PMapServer7 
does not automatically zoom to the underlay extents.  
You can manually zoom to the underlay extents after 
exiting the control panel by selecting Zoom Underlay 
from the Ui-View32 Map menu selection.

If you do not see local streets and highways in USA 
or Canada when you zoom in :
	The Ui-view32 PMap Data directories are not 
	set properly.  Use Control Panel, Options, and
	Easy Setup to configure.
	
	When all else fails, hit F1 in the Ui-View32 
	Control Panel and read the help file. 


The PMap7 world map only contains cities, no streets 
or roads.

Much detailed Ui-View32 and PMapServer7 information,
including downloads is available at : 
http://www.uiview.org.
 
Thanks,
Bill KC9XG
For Undertow Software


