############ xsatcom RUNTIME CONFIGURATION FILE: xsatcomrc ##########
#                                                                   #
# PLEASE NOTE! In order to keep the parser for this file simple,    #
# the runtime configuration entries below must all be present and   #
# in the order presented, since they are all read-in in a fixed     #
# sequence. Blank lines or those starting with a # or white space   #
# are ignored.                                                      #
#                                                                   #
# Please check ALL and EDIT as needed!!                             #
#                                                                   #
#####################################################################
#
# Enable Transceiver CAT. Available entries are FT847 or FT857
# or K2 or K3. Specify NONE if you have a different Transceiver
# or you do not want CAT.
NONE
#
# Serial device used by Transceiver
/dev/k3
#
# Serial device used by Yaesu GS-232 Rotor Controller. Specify
# NONE if you do not have a GS-232 or do not want Rotor control.
NONE
#
# Azimuth and Elevation tracking resolutions in deg
# !(Minimum = 1)!
# Low resolution
5
# Medium resolution
2
# High Resolution
1
#
# Default Azimuth/Elevation parking position of rotors
# Azimuth parking
180
#
# Elevation parking
0
#
# Azimuth offset correction needed when using the
# G-5500 Azim/Elev rotors with the GS232 controller
180
#
# Azim/Elev angular step in horizon search (integer degrees)
2
#
# Time step of AOS/LOS search (integer minutes)
2
#
# Horizon threshold for AOS/LOS searches (in degrees)
0.03
#
# Xplanet files directory. Last / is needed!
/usr/share/xplanet/
#
# Options to pass to xplanet to render current satellite, max 79 chars
-wait 5 -window -geometry 1024x640 -projection rectangular
#
# Which WGF constants to use ( 0 = WGS72-old, 1 = WGS72, 2 = WGS84 )
2
#
