From:	Dan Puckett <af045@dayton.wright.edu>
Subject: Pixie 2 pc board
Date:	Fri, 30 Jun 1995 15:43:08 EDT

Hi all,

One more Pixie message.  I have posted artwork for a slightly modified
printed circuit board.  It fixes the shorted capacitor problem with
the boards we got at Dayton and fixes the problem of floating pin 3 that
was published in QRPp.  I also modified the layout to allow mounting R5
in the usual fashion instead of having to tack solder it.  There may
have been a reason for the original layout requiring R5 to be tack
soldered.  I haven't figured that part out yet, but if that is a problem
go ahead and tack solder it.

Anyway the file is in PostScript format.  It includes a parts layout
as well as the copper pattern.

Oh well, back to the soldering iron.

Dan  WD8AAU   ouch!  ouch!  Man is that iron hot!

af045@dayton.wright.edu