 |
 |
Name: 6J6 Use: Miniature tube type used as an RF power amplifier and oscillator or as an AF amplifier. With a push-pull arrangement of the grids and with the plates in parallel, it is also used as a mixer at frequencies as high as 600 MHz. Notes: Requires a miniature 7-pin socket and may be mounted in any position. |
||
6J6 Medium-Mu Twin Triode Characteristics Data Source. . . . . . . . . RC-15 Heater or Filament Voltage . 6.3 volts Heater or Filament Current . 0.45 amperes EIA Base . . . . . . . . . . 7BF Substitutes. . . . . . . . . None |
Capacitances and Design Maximum Values: Section.. . . . . . . . . . Each Triode C/in. . . . . . . . . . . . 2 pf C/out . . . . . . . . . . . 0.4 pf C/gp. . . . . . . . . . . . 1.5 pf Plate Dissipation . . . . . 1.5 watts Maximum Plate Voltage . . . 300 volts Maximum Frequency . . . . . 600 MHz |
Typical Operation as a Receiving Tube Description Ep Eg EgMax Es Is IsMax Ip IpMax Rp TC AF Zl PO ====================================================================== Class A Amp 100 50* - - - - 8.5 - 7.1K 5300 38 - - Typical Operation as a Transmitting Tube Class of Service Ep Eg EgMax Ip IpMax Ig Drive Zl PO ==================================================================== Class C Amp & Osc 150 -10 - 30 - 1.6 0.035 - 3.5 * = Value of cathode bias resistor |