Name: 6AN8 Use: Miniature tube type used in color television receiver applications. The pentode unit is used as an IF amplifier, a video amplifier, an agc amplifier, or a reactance tube. The triode unit is used in low-frequency oscillator, sync-separator, sync-clipper, and phase-splitter circuits. Notes: Requires a miniature 9-pin socket. |
6AN8 Medium Mu Triode - Sharp Cutoff Pentode Characteristics Data Source. . . . . . . . . TungSol Heater or Filament Voltage . 6.3 volts Heater or Filament Current . 0.45 amperes EIA Base . . . . . . . . . . 9DA Substitutes. . . . . . . . . None |
Capacitances and Design Maximum Values: Section. . . . . . . . . . Pentode C/in. . . . . . . . . . . . 7 pf C/out . . . . . . . . . . . 2.4 pf C/gp. . . . . . . . . . . . 0.04 pf Plate Dissipation . . . . . 2 watts Screen Dissipation. . . . . 0.5 watts Maximum Plate Voltage . . . 300 volts Maximum Screen Voltage. . . 300 volts Section . . . . . . . . . . Triode C/in. . . . . . . . . . . . 2 pf C/out . . . . . . . . . . . 2.7 pf C/gp. . . . . . . . . . . . 1.5 pf Plate Dissipation . . . . . 2.5 watts Maximum Plate Voltage . . . 300 volts |
Typical Operation as a Receiving Tube Description Ep Eg EgMax Es Is IsMax Ip IpMax Rp TC AF Zl PO ============================================================================ Triode Class A Amp 200 -6 - - - - 13 - 5750 3300 - - - Pentode Class A Amp 200 180* - 150 2.8 - 9.5 - 30K 6200 - - - * = Value of cathode bias resistor |