Use:
Pentode power amplifier used as an RF amplifier and as a driver and oscillator in transmitting service.
Notes: Requires a miniature 9-pin socket.
|
|
Name: 5763 Use: Pentode power amplifier used as an RF amplifier and as a driver and oscillator in transmitting service. Notes: Requires a miniature 9-pin socket. |
||
5763 Beam Power Pentode Data Source. . . . . . . . . RC-29 & TT-5 Heater or Filament Voltage . 6.3 volts Heater or Filament Current . 0.75 amperes EIA Base . . . . . . . . . . 9K Substitutes. . . . . . . . . None |
Capacitances and Design Maximum Values: Capacitances and Design Maximum Values C/in. . . . . . . . . . . . 9.5 pf C/out . . . . . . . . . . . 4.5 pf C/gp. . . . . . . . . . . . 0.3 pf Plate Dissipation . . . . . 13.5 watts Screen Dissipation . . . . 2 watts Maximum Plate Voltage . . . 350 volts Maximum Screen Voltage. . . 250 volts Maximum Frequency . . . . . 50 MHz |
Typical Operation as a Transmitting Tube Class of Service Ep Es Esup Eg EgMax Ip IpMax Is IsMax Ig Drive Zl PO ------------------------------------------------------------------------------- Class C Amp 350 250 - -28.5 - 48.5 - 6.2 - 1.6 0.1 - 12 Class C Mod Amp (Plate) 300 250 - -42.5 - 50 - 6 - 2.4 0.15 - 10 Class C Mult (2X) 300 250 - -75 - 40 - 4 - 1.0 0.6 - 2.1 Class C Mult (3X) 300 235 - -100 - 35 - 5 - 1.0 0.6 - 1.3 |