[SI-LIST] : Interconnects

About this list Date view Thread view Subject view Author view

From: Rich Peyton (p2rich@testprobe.com)
Date: Wed Feb 28 2001 - 12:47:36 PST


Question for all SI Gurus:

Most electrical data supplied by interconnect companies are based upon
an ideal Characteristic Impedance of 50 Ohm test configuration. Now if
a customer did not have an ideal 50 Ohm situation all this info is
basically for reference, for there engineering Dept. Because alot of
Info is dependent on customers configuration, my question is: What info
is "most important" in determining selection of interconnects for High
or Low Frequencies, without knowing configuration?

Thanks for the replies,
Rich



**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:58 PDT