[SI-LIST] : Parallel Termination for a differential signal

From: subramanya C K ([email protected])
Date: Tue Feb 20 2001 - 02:16:50 PST

• Next message: Steve Rogers: "[SI-LIST] : SYNTHETIC INDUCTOR USING SHORTED TX LINE"
• Previous message: Christoph Hillen: "RE: [SI-LIST] : damping resistors ??"
• Next in thread: Mike Mayer: "Re: [SI-LIST] : Parallel Termination for a differential signal"
• Reply: Mike Mayer: "Re: [SI-LIST] : Parallel Termination for a differential signal"

Dear SI experts,
Please let me know the different ways in which one can define a parallel
termination for a differential signal in the topology file (of Quad XNS
tool)
I am attaching the topology with this mail.
Also, some one please explain the usage of CONNECT_NODE construct in the
same.

Thanks
Subramanya

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Steve Rogers: "[SI-LIST] : SYNTHETIC INDUCTOR USING SHORTED TX LINE"
• Previous message: Christoph Hillen: "RE: [SI-LIST] : damping resistors ??"
• Next in thread: Mike Mayer: "Re: [SI-LIST] : Parallel Termination for a differential signal"
• Reply: Mike Mayer: "Re: [SI-LIST] : Parallel Termination for a differential signal"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:54 PDT