[SI-LIST] : high speed/low loss soldermasks

About this list Date view Thread view Subject view Author view

From: Sean Murray (seandm@mmspec.com)
Date: Thu Feb 01 2001 - 08:49:07 PST


Anyone have any recommendations for a soldermask to put on high speed boards
(ro4003) that has a low loss tangent? We are finding that the rogers boards
tend to be a little fragile.

Sean Murray
General Manager

M&M Specialties, Inc.
1236 W. Southern Ave. #106
Tempe, AZ 85282
1-800-892-8760 x105

www.mmspec.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:48 PDT