Date: Fri Jan 26 2001 - 04:53:49 PST
I have a question with respect to routing under 45 degrees angles (-45, 0, 45,
90). From the si-list I have noticed that
some designs use this technique. I am interested in designing 4 layers of
striplines in 45 degree routing.
Currently we use Zuken's route editor 5000. However, our version only handles 0
and 90 degrees (Manhatten routing).
Currently we are also evaluating a Specctre route editor (Cadence). It is too
new to gauge is capabilities.
-1- can Zuken's route editor work under 45 degrees angles? Or more general,
under any angle(s) you choose?
-2- what are the capabilities of Specctre in this respect?
-3- does "any angle" routing exists for PCBs ( like wire wrap )??
Does anyone have any personal experience in these topics or is willing to
contribute some personal thoughts??
PCB?EMC engineering Agfa-Gevaert NV
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:45 PDT