Re: [SI-LIST] : [SI-LIST] Filter modeling technique in XTK

From: ARiazi ([email protected])
Date: Tue Jan 23 2001 - 21:31:40 PST

• Next message: subramanya C K: "[SI-LIST] : Problems with XNS"
• Previous message: DJA: "[SI-LIST] : Speaker at IEEE-EMC Society - Los Angeles, CA Chapter - 6:00 PM, on Wednesday, January 24, 2001"
• In reply to: [email protected]: "[SI-LIST] : [SI-LIST] Filter modeling technique in XTK"

Won Kwang Kal Wrote:

> Dear all si-list members.
>
> I want to know how to model 3 terminals passive device in XTK.
>
> I got a equivalent circuit of the filter.
>
> But I don't know how I can make a filter(3 terminals) model for using XTK.
^^;
>
> Thanks for your help.
>
> ##################################################
> Won Kwang Kal
.
Hi Won:

The Topology Specification (TOPSPEC) facility is frequently utilized to
define
the topology of a multi-nodal RLC block (although usually limited to only
one- or
two-port networks) in the model file. The topology section is inserted
within
 TOPSPEC and ENDTOPSPEC statements and can be referenced by the
topology (.top) file via three possible means.

I suggest to review sections of the XTK/TLC User Manual which describe
TOPSPEC applications, or to contact the Innoveda technical support.

Best of Luck!

Abe Riazi
ServerWorks.

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: subramanya C K: "[SI-LIST] : Problems with XNS"
• Previous message: DJA: "[SI-LIST] : Speaker at IEEE-EMC Society - Los Angeles, CA Chapter - 6:00 PM, on Wednesday, January 24, 2001"
• In reply to: [email protected]: "[SI-LIST] : [SI-LIST] Filter modeling technique in XTK"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:43 PDT