[SI-LIST] : RE: IBIS model question

From: Doug Hopperstad ([email protected])
Date: Tue Jan 16 2001 - 11:07:42 PST

• Next message: Matt Kaufmann: "[SI-LIST] : SI position at Broadcom"
• Previous message: �L�·�: "Thanks!, RE: [SI-LIST] : How to simulate SCSI backplane with 15 slots?"
• Next in thread: Scott McMorrow: "Re: [SI-LIST] : RE: IBIS model question"
• Reply: Scott McMorrow: "Re: [SI-LIST] : RE: IBIS model question"
• Maybe reply: �L�·�: "FW: [SI-LIST] : RE: IBIS model question"

I have a question regarding the IBIS model format. Within the model there
R_Fixture. I understand that the R_fixture was used to create the rise and
fall time charts. My question is the value of the resistor. Is there a
relationship of the resistor to a load resistor that would be used in the
lab? The information below came from a SSTL-2 output model.

Vref = 1.250V
Rref = 0.125k
Cref = 10pF
Vmeas = 1.250V

[Rising Waveform]
R_fixture = 0.125k
V_fixture = 1.250
V_fixture_min = 1.250
V_fixture_max = 1.250

R_load = 0.125k

How come the resistor value does not reflect a more typical 50 ohm
application?

Doug Hopperstad

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Matt Kaufmann: "[SI-LIST] : SI position at Broadcom"
• Previous message: �L�·�: "Thanks!, RE: [SI-LIST] : How to simulate SCSI backplane with 15 slots?"
• Next in thread: Scott McMorrow: "Re: [SI-LIST] : RE: IBIS model question"
• Reply: Scott McMorrow: "Re: [SI-LIST] : RE: IBIS model question"
• Maybe reply: �L�·�: "FW: [SI-LIST] : RE: IBIS model question"

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:37 PDT