[SI-LIST] : multiwire experience?

About this list Date view Thread view Subject view Author view

From: Zabinski, Patrick J. (zabinski.patrick@mayo.edu)
Date: Mon Jan 15 2001 - 13:57:14 PST


On a particular project I'm working on, it has been proposed
that we use multiwire boards in place of traditional multilayer
printed circuit boards. Does anyone out there have experience,
good or bad, with multiwire you'd care to share? I'm interested
in any/all experience, including performance, crosstalk, design ease,
reliability, cost, etc....

Thanks,
Pat

-----
  Pat Zabinski Ph: 507-538-5499
  Mayo Foundation Fx: 507-284-9171
  200 First St SW Em: zabinski.patrick@mayo.edu
  Rochester, MN 55905 Wb: www.mayo.edu/sppdg/simulation.html

**** To unsubscribe from si-list or si-list-digest: send e-mail to
majordomo@silab.eng.sun.com. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:37 PDT