RE: [SI-LIST] : Tool comments

About this list Date view Thread view Subject view Author view

From: zanella, fabrizio ([email protected])
Date: Wed Jan 10 2001 - 15:01:16 PST


Todd, we evaluated the Avant Cosmos Scope tool a few weeks ago and found it
to have several good features which are not present in the Avant Waves tool.
We decided to purchase several licenses of the tool, and will be using it
for HSPICE post processing.

Regards,

Fabrizio Zanella
Signal Integrity
EMC Corporation
508-435-2075, x14645
[email protected]

-----Original Message-----
From: Todd Westerhoff [mailto:[email protected]]
Sent: Wednesday, January 10, 2001 5:34 PM
To: [email protected]
Subject: [SI-LIST] : Tool comments

Does anyone have experience with Avanti's new waveform display -
Cosmos-Scope, and can you comment on it's usefulness for SI purposes? The
ability to perform measurements on waveforms looks interesting, but the
brochure doesn't have enough detail to allow us to make any judgements ...

Comments (both public and private) are welcome and very much appreciated.

Todd.

Todd Westerhoff
Signal Integrity Engineer
Hammerhead Networks
5 Federal St.
Billerica, MA 01821
(978) 671-5084
email: [email protected]

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:36 PDT