[SI-LIST] : How to simulate SCSI backplane with 15 slots?

About this list Date view Thread view Subject view Author view

From: ªL´Â·× ([email protected])
Date: Wed Jan 10 2001 - 01:00:05 PST


Dear SI gurus,
 
One question regarding SI simulation for SCSI backplane. How do I define the
worst case of SCSI backplane with 15 slots for 15 SCSI drives?
 
Shall I do the SI simulation, theoretically, for all combinations of 15 SCSI
drives?
There are huge combinations -- the number of drives mixed with the number of
slots (location on the backplane). Based on my knowledge, I would like to
put drives on even spaces for the best case of SI simulation. for example,
three drives on slot 1st,8th, and 15th. For the worst case, intuitively, I
would like to put them on slot 1st,2nd, and 3rd because of far away from end
terminators.
 
The question is that how to assure the worst case for simulation? Or,
doing all combinations is only way to do even it is exhaustive.
 
Your comments are highly appreciated.
 
Best Regards,

John Lin
Senior SI Engineer, Server Team, ARD4
Quanta Computer Inc.,Taiwan, R.O.C.
Email: [email protected]
Tel: 886+3+3979000 ext. 5183

 

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:35 PDT