From: Mohan Kumar (email@example.com)
Date: Sun Jan 07 2001 - 20:28:38 PST
I did face the same problem. I guess this limitation is brought about by the FMIN, FMAX and NP settings in the FFT syntax. The FMIN and FMAX values are dependent upon the start and stop time of the transient simulation. Please refer to the Avanwaves manual ( Chapter 26 ) for more details.
You could also use .FOUR ( fourier transform ) if u r not particular about any window.
R. Mohan Kumar
MTS, Analog Group
SAGE Design Systems ( India ) Pvt. Ltd
From: Jinhua Chen <firstname.lastname@example.org>
To: SI List <email@example.com>
Date: Friday, January 05, 2001 10:08 PM
Subject: [SI-LIST] : The FFT analysis with AvanWaves
>I am using the FFT feature in AvanWaves to analysis the frequency
>spectrum of the high speed data stream (3+ Gbps). I want to see the
>spectrum up to 10 GHz. But the output spectrum stopped at about
>5.2 GHz. There might be two causes: 1. There is a range setting
>somewhere I did not know. Or, 2. The AvanWaves has its own frequency
>limit for the output spectrum.
>Thanks for the comments!
>| NORTH EAST SYSTEMS ASSOCIATES, INC. |
>| ------------------------------------- |
>| "High Performance Engineering & Design" |
>| Jinhua Chen, Ph.D e-mail: firstname.lastname@example.org |
>| Sr. SI Engineer http://www.nesa.com/ |
>| NESA, Inc. Tel +1.978.897-8787 |
>| 636 Great Road Fax +1.978.897-5359 |
>| Stow, MA 01775 USA |
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>email@example.com. In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
firstname.lastname@example.org. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:35 PDT