From: George Borkowicz ([email protected])
Date: Fri Jan 05 2001 - 10:50:14 PST
I know I' beeing boring and out of whack but
why not define this spec in IBIS terms right
from the scratch? Would save me a lot of time
later when it is all done chasing you guys for models :-)
> -----Original Message-----
> From: D. C. Sessions [SMTP:[email protected]]
> Sent: Thursday, January 04, 2001 12:24 PM
> To: [email protected]
> Subject: [SI-LIST] : Comments on proposed standard
> A year ago I tried to start a thread on what a clean-sheet-of-paper
> signaling standard would look like. Not much response, so I had to
> wing it. Due to intense demand for short IC-to-IC connections at
> absurd signaling rates, earlier this month I presented a proposed
> standard for Scalable Low-Voltage Signaling to JEDEC's JC-16
> committee on electrical interfaces.
> A copy of the draft is at http://www.primenet.com/~sessions/SLVS-400.pdf
> Comments (or at least germane ones) invited.
> | The race is not always to the swift, nor the battle to the strong. |
> | Because the slow, feeble old codgers like me cheat. |
> +--------------- D. C. Sessions <[email protected]> --------------+
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected] In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:35 PDT