From: Yehuda D. Yizraeli ([email protected])
Date: Wed Jan 03 2001 - 09:42:21 PST
Hi,
We would like to put our analog parts on a separate PCB. The video is out
of DACs on the main chip (non-analog board).
Whats the best place for the video filter? Should it be put on the analog
board (the long cable from the main chip to the filter will hold a non
filtered signal), or should it be put on the main board (non analog board)
and the filtered signals will be directly connected to the output world?
The main issues here is SNR and other noise/signal interferences!
best regards, yehuda
���`����,��,����`�������`����,��,����`�������`����,��,����`����,��,�
Yehuda D. Yizraeli
Zoran Microelectronics Ltd. E-mail : [email protected]
Advanced Technology Center Direct Tel: 972-4-85-45-795
P.O.B. 2495, Haifa 31204, Operator : 972-4-85-45-777
ISRAEL Cellular : 972-52-556-335
Fax : 972-4-8-551-550
http://www.zoran.com eFax : 1-(208)-441-3298
���`����,��,����`�������`����,��,����`�������`����,��,����`����,��,�
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"The difference between genius and stupidity is
that genius has its limits"
--Albert Einstein
"The impossible is often the untried."
--Jim Goodwin
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Tue May 08 2001 - 14:30:32 PDT